okey. i will instal cheap oil temp gauge into tranny and will look on temps. i really dont know if it will be neccesary. and add egr, oil temp, oil pressure into engine. and will look carefully while getting firstto 140, then 150 end so on.

about suspension. what i need? i already has tokico illumina struts and springs. poly mounts on all suspension. got parts for traction bar and need to make it up, after i will redo downpipe. (it not allow for traction bar right now.)

 

get speed rated tires, and get them balanced. go to another shop, get them balanced again. balancers are never accurate enough for 180mph

and get a ------- alignment. blowing a tire at anything above 120 = you die

 

anyone got a link to that celica going fast as hell and then u see the front lift up just a tad bit for a couple seconds then all of a sudden its doing flips in the air smashes into the ground and practically ------- disintigrates?

 

i think that was a RX7 trying to break 250mph then somehow it lifted at 180ish.. looked like a piece of paper flying in the air lol

 

Driven by Csaba Csere of Car and Driver if that's the one. He said he hit a slight bump

 

mmm. then its need to install sum pressure sensors on suspension. to see on downforce. but i dont know how? how i can get measurment of downforce when driving?

 

http://videos.streetfire.net/categor...1F336AC218.htm

 

I wonder what the old B20 accords/prelude trannies can do They must have super long gears for economy just like THe F/H series. i guess there's at least a cable to hydraulic tranny conversion involved.

What you will absolutely need is the best cooling available: Racing IC, RAD and most off all engine, turbo and tranny oil coolers. Syntec 5-50 in engine and tranny, evans coolant.... That sort of stuff.

I can hit 280 km/h with an accord tranny on my prelude h22 at 20 psi. Maybe more but I'm not the one who's gonna try it.

 

my accord trany in my h22 reving the car to 8000 i can hit 120mph in 3'd gear

 

then do it, and stop posting about it. But obviously, If you need to ask on a web forum what is needed, you wont be getting there.