14B oil feed line help
11-02-2003, 03:46 PM
#1
1.5 BAR
Thread Starter
Join Date: Nov 2003
Posts: 910
14B oil feed line help
hwy guys, i about to start my turbo project on my d16z6 this weekend, but i ran into a little problem. i can figure out what fitting i need to connect a earls -3 line to the oil inlet on my 14b turbo. some guy told me i need a "reverse compression fitting, or something like that. can any 1 helpthanks alot
11-02-2003, 10:14 PM
#4
1.0 BAR
Join Date: Jan 2003
Posts: 412
Re:14B oil feed line help
yes, they share the same fittings into it. you can purchase the CORRECT feed fitting here (because it is NOT a standard fitting as mentioned by gimpy civic). it is a 12 x 1.25 fitting and you will need it to a -3an flare.
http://www.hahnracecraft.com/hahn/parts/install.htm
http://www.hahnracecraft.com/hahn/parts/install.htm
11-02-2003, 11:54 PM
#5
0.5 BAR
Join Date: Mar 2003
Posts: 139
Re:14B oil feed line help
if i am not mistaken that part from hahn racecraft is made to fit the turbo if you still have the stock hard line still on it. i ordered that part for my t-25 and it did not fit right onto the turbo itself. i had to use the part grumpy civic is talking about. hope that helps...
11-03-2003, 12:26 AM
#7
0.5 BAR
Join Date: Jun 2003
Posts: 88
Re:14B oil feed line help
I bought the hahn part for my T25 and it was the wrong part and now I can't get ahold of anyone over there to return it. I keep gettin their "we're out to lunch voicemail" and noone returns my calls. I dropped like 20 bux with shipping on that part and it sux that I can't return it. I ended up buying that 7/16 inverted flare fitting and it worked perfect, and since the package came with two of them, I sold the other one in the "for sale forum". So, if anyone wants this hahn part, i'll sell it for 10 bux shipped with the compression washer. It's a 12x1.25 to a -4an. It should fit any 14b. Just email me if you want it mstolars@highrev.net.
11-03-2003, 08:01 AM
#10
1.0 BAR
Join Date: Jan 2003
Posts: 412
Re:14B oil feed line help
if it didnt fit, you ordered the WRONG part. i ordered it and it screwed right down onto the turbo and fit my -4an line perfect. it's the 2nd part number on the page.
H TZ-8085
i know for a fact this is the right part because i just bought one about a month ago. call them up and say you need this part but for a -3an flare.
H TZ-8085
i know for a fact this is the right part because i just bought one about a month ago. call them up and say you need this part but for a -3an flare.
