14B oil feed line help
 

??? hwy guys, i about to start my turbo project on my d16z6 this weekend, but i ran into a little problem. i can figure out what fitting i need to connect a earls -3 line to the oil inlet on my 14b turbo. some guy told me i need a "reverse compression fitting, or something like that. can any 1 help??????

thanks alot

Re:14B oil feed line help
 

Hello, the inlet is a 7/16 inverted flare.. you need one of those -> your AN-3. Earls makes them and I'd give you the p/n but I threw away the wrapper!

Re:14B oil feed line help
 

Just curious i'm having a hard time finding the fitting for my t25 and was wondering if its the same as the 14b?

Re:14B oil feed line help
 

yes, they share the same fittings into it. you can purchase the CORRECT feed fitting here (because it is NOT a standard fitting as mentioned by gimpy civic). it is a 12 x 1.25 fitting and you will need it to a -3an flare.

http://www.hahnracecraft.com/hahn/parts/install.htm

Re:14B oil feed line help
 

if i am not mistaken that part from hahn racecraft is made to fit the turbo if you still have the stock hard line still on it. i ordered that part for my t-25 and it did not fit right onto the turbo itself. i had to use the part grumpy civic is talking about. hope that helps...

Re:14B oil feed line help
 

im not grumpy :(

im gimpy!

Re:14B oil feed line help
 

I bought the hahn part for my T25 and it was the wrong part and now I can't get ahold of anyone over there to return it. I keep gettin their "we're out to lunch voicemail" and noone returns my calls. I dropped like 20 bux with shipping on that part and it sux that I can't return it. I ended up buying that 7/16 inverted flare fitting and it worked perfect, and since the package came with two of them, I sold the other one in the "for sale forum". So, if anyone wants this hahn part, i'll sell it for 10 bux shipped with the compression washer. It's a 12x1.25 to a -4an. It should fit any 14b. Just email me if you want it mstolars@highrev.net.

Re:14B oil feed line help
 

sorry about that...

Re:14B oil feed line help
 

thanks for your help guys, if any one can get their hands on the p/n for the 7/16th inverted flare i would much appreciate it.

Re:14B oil feed line help
 

if it didnt fit, you ordered the WRONG part. i ordered it and it screwed right down onto the turbo and fit my -4an line perfect. it's the 2nd part number on the page.

H TZ-8085

i know for a fact this is the right part because i just bought one about a month ago. call them up and say you need this part but for a -3an flare.