14B -> HF mani ??????
#12
Re: 14B -> HF mani ??????
Originally Posted by ibassez
those are all the right blots its not rocket science just take a good look at it
I see why I was having trouble now, I bought the wrong screws. I need to get ones without heads on them!!! DAAH! Thanks again everyone who gave me positive help!
#13
Re: 14B -> HF mani ??????
I have also recently bought this adaptor for my project and Ive been searching all over for the bolts. The ones I am having trouble finding are:
1- M10x1.25mm thread pitch x 25mm long socket head cap screw
3- M8x1.25mm thread pitch x 35mm long set screws
these seem to not be very common at hardware stores, autoparts stores. And everywhere online thats had them seems to sell only by the box. where have you guys found these or ordered these from??
1- M10x1.25mm thread pitch x 25mm long socket head cap screw
3- M8x1.25mm thread pitch x 35mm long set screws
these seem to not be very common at hardware stores, autoparts stores. And everywhere online thats had them seems to sell only by the box. where have you guys found these or ordered these from??
#14
Re: 14B -> HF mani ??????
I ended up buying the M8x1.25x35mm at Rural King( like a tractor supply/farm & fleet). I threaded them into the adapter plater with nuts on them, and then cut the heads off. The reason I put the nut on there was to straighten the threads back out so I could thread them back on once I put the turbo against the adapter plate. The M10x1.25x25mm I stole from Rural King cause all they had was one on a display. On this bolt I cut the head off of it, and welded one of the socket head screw heads on it. It works perfect!!! The only probelm I have run into is that I need to cut one of the bolts shorter than the others, but you can figure this out once you have them all threaded and the turbo against it.
Thread
Thread Starter
Forum
Replies
Last Post
sikcrx89
Turbo Parts For Sale
6
02-14-2007 02:12 AM
drewtyson
Turbo Parts For Sale
9
09-04-2006 07:53 PM