|
~~~UPDATE~~~~~MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
33 Attachment(s)
Well I have been putting parts together for a while now and thing are falling inline. Got my block back from the shop a few weeks ago.......
here is the set up. B18a 81.5 bore/hone, and balanced wiseco pistons -12cc dish TT rods Skank 2 valve springs LSD clutch H1C 12cm egay wg arp head studs ford 600cc injectors..... and so on Attachment 17324 Attachment 17325 Attachment 17326 Attachment 17327 Attachment 17328 Attachment 17329 Attachment 17330 Attachment 17331 Attachment 17332 Attachment 17333 Attachment 17334 Attachment 17335 Attachment 17336 now im just wating on my bearings from majestic. I was gona use the acl's but it was too much money/work. UPDATES Well got the bearings in and they all fit very well and all fell into specs. SO now I hade to hone the small end of the TT rods to get my pison pins to fit. Attachment 17337 brake hone to the rescue!!!!!! Attachment 17338 It was a tight fit. Attachment 17339 mounted the drill in the vice with the hone in the drill chuck and got to work. I did it a few differant times to make sure that I didnt get in there and just hog the ---- out of it. Attachment 17340 Attachment 17341 Attachment 17342 Now that the lower end was done it was time to move onto the head. Went to napa and picked up some laping compound Attachment 17343 Pulled the head out and stripped it clean of all the valve train Attachment 17344 Lapping this ---- by hand was gay as ----. Attachment 17345 So the I took the lapper and put it on the grinder and tried to make it as round as possable to fit in my drill Attachment 17346 Attachment 17347 Then I lapped the ever loving ---- out of them!!!!!!!!! Attachment 17348 turned out pretty good SO I put the spring seats back in and drove on the new valve stem seals. Pulled out my skank 2 valve springs Thanks 88DX Attachment 17349 Side by side the skank 2's are so much beafer than the stock its not even funny. Attachment 17350 the head went back together good Attachment 17351 so it was time for a fresh coat of paint Attachment 17352 Looks way to much like mexi crome Attachment 17353 So I striped it back down to repaint it a differnt color. While I was wating for it to dry I checked out the oil pump and it is as tight as new so I painted it Attachment 17354 and threw it on Attachment 17355 I put the head studs in and now I need to go to the store and pick up some non mexi paint Attachment 17356 |
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
ACL's are too much work? You drop them in, if the crank spins you're good to go!
Other than that comment, looks sweet. You have springs, buying cams later? |
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
Originally Posted by Minor Threat
ACL's are too much work? You drop them in, if the crank spins you're good to go!
So i figured out what the colors of the rainbow my crank and rods needed.
Originally Posted by Minor Threat
Other than that comment, looks sweet. You have springs, buying cams later?
|
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
Originally Posted by ratcityrex
I plastigaged them all out and 3 mains wont work and 1 rod bearing wont work... :'(
So i figured out what the colors of the rainbow my crank and rods needed. Thanks, yep Im gona call up delta and get some TURBO CAMS!!!!!!.......lol |
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
Originally Posted by ososlohatch
i've never had a problem with properly sized acl's .. nice setup man good luck
Well my las build was within spec, but this motor had 185k when I got it and I think it was a little loose. |
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
Did you just rattlecan the block cause that looks really good. What kind of manifold are you bolting that holset to?
|
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
Originally Posted by stillnoturbo
Did you just rattlecan the block cause that looks really good. What kind of manifold are you bolting that holset to?
The holset is gona get bolted up to the good old hmt top mount stock mani, elephant style!!!!!!!!!! |
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
---- acl's KING all the way !!!
how you going to know if your car is leaking oil if you paint your block black ? |
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
How much did you pay for the piston? And for the block work? We have almost the same build :6
|
Re: MY B18 BIG BLACK PROJECT........ 56k NO WAY!!!!!
Originally Posted by bitchasscracker
how you going to know if your car is leaking oil if you paint your block black ?
Originally Posted by Teg2Boo
How much did you pay for the piston? And for the block work? We have almost the same build :6
|
| All times are GMT -5. The time now is 09:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands