i went with some 97 cent Ace hardware rattle can on mine. Lasting pretty well, just a little flaking. ha.

Otherwise go with some high-temp paint from vatozone or checker. It will do fine if you prep it well.

Even a third option is finding someone local to you that does powder coating in their garage, they would do it for less than $95

 

powder coat an exhaust manifold?


err it wouldn't it burn off?

 

powdercoat would burn off.

VHT exhaust manifold hi temp paint

good to 2000F basically the same as BBQ paint.

 

from what I see u need someone else to weld it to look good if that was your qwelding

 

A local powdercoat shop does a 2000deg ceramic coating $95 both inside and out for 4cyl manifold. IIRC is techline products.

 

Dude it's just tac welded for now, not supposed to look pretty yet. I am going to have an experienced welder I know TIG weld it once the test fit goes perfect.

 

http://www.techlinecoatings.com/Exhaust.htm

 

Performance coatings in Auburn, WA. Stellar work. DId my last setup