Tunertoys DIY manifold.
#21
Re: Tunertoys DIY manifold.
SlowDB7 Nice job on that manifold!
Perfect HMT answer right there!
Post Whoring Alert - BTW TT Log Manifold Kits are on sale this week, check our post in FS.
Originally Posted by Eville140
BBQ Grill paint works pretty darn good. I've used it quite a few times and it has never came off.
Post Whoring Alert - BTW TT Log Manifold Kits are on sale this week, check our post in FS.
#22
Re: Tunertoys DIY manifold.
Originally Posted by Inquisition
The sheer fact **** says it will work makes me sure it will fail. I did the spray paint with my downpipe. It took a couple of months, but the spray is chipping and dying. The spraypaint method doesn't last. The exhaust coating method will last. Do whatever you want. Its worth throwing another method out.
#23
Re: Tunertoys DIY manifold.
Originally Posted by Inquisition
The sheer fact **** says it will work makes me sure it will fail. I did the spray paint with my downpipe. It took a couple of months, but the spray is chipping and dying. The spraypaint method doesn't last. The exhaust coating method will last. Do whatever you want. Its worth throwing another method out.
if you CLEAN the metal before spraying it, it will hold just fine
#25
Re: Tunertoys DIY manifold.
the trick is to put the paint on thin. I've found the barbecue paint works great on everything but turbo manifolds and close to the turbo on the downpipe. (a neat trick with barbecue paint, after you paint the part, rub it down with some crumpled up newspaper and it get's this cool glossy tarnished look )
For turbo mani and DP I've found the 1200+ degree duplicolor stuff works great.
If you put it on thick it will crack with expansion/contraction and eventually flake off. My first attempt with a turbo mani I gave the part 3-4 nice even coats, but this flaked off in no time.
If you do 1 or 2 really light coats, just the bare minimum to cover, it will last a long time, I've got 10,000miles on mine and although it's faded and chipped in a couple places where I hit with a wrench, it's still pretty much clean and shiny looking.
For prep, degrease with break cleaner, sand it/wire brush the welds, then use a metal etcher like POR15 MetalReady
I still prefer true ceramic coating, keeps the temps down.
Neil
For turbo mani and DP I've found the 1200+ degree duplicolor stuff works great.
If you put it on thick it will crack with expansion/contraction and eventually flake off. My first attempt with a turbo mani I gave the part 3-4 nice even coats, but this flaked off in no time.
If you do 1 or 2 really light coats, just the bare minimum to cover, it will last a long time, I've got 10,000miles on mine and although it's faded and chipped in a couple places where I hit with a wrench, it's still pretty much clean and shiny looking.
For prep, degrease with break cleaner, sand it/wire brush the welds, then use a metal etcher like POR15 MetalReady
I still prefer true ceramic coating, keeps the temps down.
Neil
#29
Re: Tunertoys DIY manifold.
Originally Posted by ****
no trick as far as i know...did you make sure you got the one that was designed for exhaust manifolds? its rated over 1300 degrees, VHT makes it.
its on Perfek360's little single came coupe. seems to still be holding. problem is it turns a funky brownish color everywhere it was handled before the manifold was used. best advice is dont touch it after you spray it, handle it as little as possible cause the paint doesnt set up til it gets hot. this manifold sat painted in my house for months.
before heat, at install time:
after handling and heating it up (running it):
its on Perfek360's little single came coupe. seems to still be holding. problem is it turns a funky brownish color everywhere it was handled before the manifold was used. best advice is dont touch it after you spray it, handle it as little as possible cause the paint doesnt set up til it gets hot. this manifold sat painted in my house for months.
before heat, at install time:
after handling and heating it up (running it):
#30
Re: Tunertoys DIY manifold.
The VHT flameproof paint does work on turbo manifolds. I've had it on for almost a year and it hasn't chipped, cracked, burned off, or any bullshit like that. You just have to follow the instuctions on the back of the can