Some HMT style fabrication from across the pond!
 

Hi,

This is my first post so i thought i would dredge my photo bucket account for some photos of the stuff i have fabbed.

First up is a mig'd mild steel weld elbow mannyfold for a friends 3dr (kinda like a merkur). The engine is not the usual cosworth one but a zetec (same as in your zx3) with a fair bit of head work (all CNC'd), eagle rods, diamond pistons, GT30 and run with megasquirt that i mapped.
These pics are a couple of years old now from what i like to call my "pre TIG period".

Power was 330bhp@bar and much more now we have wound it up. Not had a chance to get back to the dyno but should be 400 bhp+.

Positioning the engine for new mounts

Attachment 21320
Attachment 21321
Attachment 21322
Attachment 21323

The flywheel we designed and had machined to run the cosworth clutch on the zetec and bolt to a T5.
http://i33.photobucket.com/albums/d9...9/IMAG0122.jpg

Manifold before paint
Attachment 21324

Checking if the GT30 will fit.
Attachment 21325
Attachment 21326

Interior
Attachment 21327

Engine in and nearly ready to go.
Attachment 21328
Attachment 21329

Will chuck some pictures of other projects up in a while.

Cheers,

Doug,
Ipswich, Suffolk, England!

Re: Some HMT style fabrication from across the pond!
 

wow nice. Looks like a lot of money in that setup though. Was the mani the only thing fabbed? you didn't show any charge pipe pics or the exhaust so i had to ask.

Re: Some HMT style fabrication from across the pond!
 

that manifold is Tits Mcgee O0

Re: Some HMT style fabrication from across the pond!
 

Very nice man... The real question is are you goinbg to be a siissy faggot like almost ALL your local counterparts and NOT post any porn... I bet a FLAKE bar you fail..... Surprise me.


Its tough, I know.... BUT PORN NOW NIG

Re: Some HMT style fabrication from across the pond!
 

looks solid,

Re: Some HMT style fabrication from across the pond!
 

Nice, someone that actually braced a turbo. Very clean set up.

Re: Some HMT style fabrication from across the pond!
 

nice ride but read the noob rulz.
post porn

Re: Some HMT style fabrication from across the pond!
 

porn bitch. and then get some ripper vids up.

Re: Some HMT style fabrication from across the pond!
 

Nice build. Looks good any ripper vids? Looks like this one a bit, https://www.homemadeturbo.com/forum/...?topic=59422.0

Re: Some HMT style fabrication from across the pond!
 

Very cool.

:y