Re: Not FI but thought you might like my bike buildup...fender pics 3/11
Have to say she's prettier than your bike ;) Mines 8 and I have a white shotgun that 8 1/2. Any Remington will do ;)but make sure you use high quality paint ;D Now you have a name for the bike too. Cool name for a bike I'd say.
|
Re: Not FI but thought you might like my bike buildup...fender pics 3/11
6 Attachment(s)
Thanks for the kind words guys, she's incredible!
Here's what I did the day before she was born: Attachment 19093 Attachment 19094 Attachment 19095 Attachment 19096 Attachment 19097 I'm liking it so far. Again, the sides will be cut down to slim up the fender. Also, I'm going to make some mini round bar struts to keep the top steady. I also got my new compressor in- The last one was just too physically big to fit into where I needed it to be along with the tank and battery and electricals. I included the can to show the actual size, this thing is tiny! Much better. Will take a bit longer to fill the tank, but I'm not too concerned. Attachment 19098 Thanks guys Sky |
Re: Not FI but thought you might like my bike buildup...fender pics 3/11
1 Attachment(s)
using my ultra sweet MS Paint skills, here's a rendering of the exhaust I want to build. Any thoughts?
Attachment 19080 Thanks Sky |
Re: Not FI but thought you might like my bike buildup...fender pics 3/11
Originally Posted by 96turboracer
Thanks for the kind words guys, she's incredible!
Here's what I did the day before she was born: http://i45.photobucket.com/albums/f9...achment001.jpg http://i45.photobucket.com/albums/f9...achment004.jpg http://i45.photobucket.com/albums/f9...achment002.jpg http://i45.photobucket.com/albums/f9...achment006.jpg http://i45.photobucket.com/albums/f9...achment007.jpg I'm liking it so far. Again, the sides will be cut down to slim up the fender. Also, I'm going to make some mini round bar struts to keep the top steady. I also got my new compressor in- The last one was just too physically big to fit into where I needed it to be along with the tank and battery and electricals. I included the can to show the actual size, this thing is tiny! Much better. Will take a bit longer to fill the tank, but I'm not too concerned. http://i45.photobucket.com/albums/f9...achment009.jpg Thanks guys Sky |
Re: Not FI but thought you might like my bike buildup...fender pics 3/11
8 Attachment(s)
I liked my design, so I went with it :)
Check the pics and let me know whatcha think. I ran out of bends right at the last minute, so the top pipe doesn't have a turnout on it, I'll have to get another bend to finish it, but I'm really pleased with the way they came out. Fitment in some areas isn't as perfect as I wanted it, but really they turned out nice. I'm going to finish weld them, and add some supports, maybe even a couple tabs on the backside with a spring connecting the two. Attachment 19022 Attachment 19023 Attachment 19024 Attachment 19025 Attachment 19026 Attachment 19027 Attachment 19028 And I took a final picture to show the exhaust placement supposedly next to my my leg, and after I took the pic, I don't think I could've looked any more like a dork. So using my sweet MS Paint skills, I put a pimp cap on. Attachment 19029 Lata Sky |
Re: Not FI but thought you might like my bike buildup...New exhaust pics 3/21
how much shock travel do you have in the front?
how much space do you have under the front of the frame when the rear is raised? |
Re: Not FI but thought you might like my bike buildup...New exhaust pics 3/21
Originally Posted by whiterice
how much shock travel do you have in the front?
how much space do you have under the front of the frame when the rear is raised? The lowest point on the frame when aired up has just over 4" of clearance. Won't be a problem. |
Re: Not FI but thought you might like my bike buildup...New exhaust pics 3/21
6 Attachment(s)
I worked on it a little more today, I wasn't happy with the first shifter and linkage setup I made- it looked too crappy. So I made a new lever out of roundbar, the tabs will be shaped soon. The linkage itself turned out pretty good.
Attachment 18695 Attachment 18696 I cut out the rear fender finally, and made some struts for it. Came out pretty well I thought. I might give the struts themselves a little more support. I also cut the section out to clear the chain. Attachment 18697 Attachment 18698 Attachment 18699 To answer the question of how much clearance I'll have, I finally got a new tube in the front tire and aired everything up. As I suspected, at the lowest point I had 4" of clearance. The little green circle is where it's finally touching. If I manage to get this bike this far over, I'm going to scare myself! Attachment 18700 Also, as a side note: I'm a cheap fellow, and I don't want to pay the local harley place for a new petcock for my tank. If anyone has a spare Sportster petcock lying around that they would sell me for cheap, let me know! Thanks guys Sky |
Re: Not FI but thought you might like my bike buildup...New pics 3/30
I suppose they wanted a couple hundred bucks for just a petcock, huh? :P
Looks real good, especially the exhaust. I've always liked those 650 twins... It's also nice to see people building custom bikes that don't have a retardedly raked-out front end...This makes me want to go back and build the bike for my sohc 750 mill I've got layin around Great work man, can't wait to see her on the road :y |
Re: Not FI but thought you might like my bike buildup...New pics 3/30
from the angle it looks like the foot peg might hit the ground first. it looks like the only reason it isnt is cause it is off the bench. i could be wrong, but from that angle it looks that way
|
All times are GMT -5. The time now is 03:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands