My HMT CHopper, AKA *** The NuttKruncher*** pics beatch...
#1
My HMT CHopper, AKA *** The NuttKruncher*** pics beatch...
Well after viewing Stillnoturbo's, thread about his weedwacker powered scooter, I was in the garage and got inspired to build something.....I had a scooter, and a gay *** gokart i didnt use anymore. I told my wife and family what i was going to do and they all thought i was nuts
but i built it anyways
Royce union makes the gayest looking scooters..in homo-*** orange.
heres the donor, powerkart something or other... this thing is fun, not very fast, but fun... i hate the bicycle handbars for a steering wheel, but you can drift this bitch on the blacktop, or very smooth cement.
I plucked the motor, throttle cable, tranny, chain, and gears.
43CC's of 2-stroke fury.... this little bitch packs a punch... its basically a toy but it hauls ***, especially when i run it on a special Methonal-Propanol mix...
Doing some frame modding to get the engine and chain to fit.
here are the 10in oldschool mad JDM GSR blades, ultralite, and ultra sexy, in flat black, with the super ***** rubber tires inlfated to 35psi. I have to drill out 3 holes to drive a bolt through it to bolt up the sprocket gear..
Here i am preppipng and drilling out the sprocket, so it mounts up to the wheel.
Heres the tire mounted up, I spent about an hour or so making sure the sprocket was aligned perfectly to the wheel, as i didnt want that bitch breaking off and catching my ankles, i also crushed the frame a little to give the chain more clearance.
heres the engine bolted down and welded to the frame, its a close fit, but its in there.
Heres a top view, the engine sits a little to high... actually i made the seat to low... but who gives a ----... warms your *** up on those long midnight runs....
My camera ran out of batteries so i didnt take any pics of the seat fabrication process.
well here is the finished product. flat black for that sleeper look
Ready to roll...... either standing up or in full cruisermode.
SO i take this bitch out on its first run and i fucked up the bearings, cause the axle wasnt bolted down hard enough... got some new bearings and tigtened that ---- up....i took it out on the main street and i would say that ---- gets up to like 30-40mph.... i had a hard time stopping it with those cheap *** rubber pads... im going to fabricate some sort of foot pedal activated roller stopper, and a loud *** fart cannon with a 2 foot pipe
Well it was fun and hopefully more people do crazy ---- like this...
but i built it anyways
Royce union makes the gayest looking scooters..in homo-*** orange.
heres the donor, powerkart something or other... this thing is fun, not very fast, but fun... i hate the bicycle handbars for a steering wheel, but you can drift this bitch on the blacktop, or very smooth cement.
I plucked the motor, throttle cable, tranny, chain, and gears.
43CC's of 2-stroke fury.... this little bitch packs a punch... its basically a toy but it hauls ***, especially when i run it on a special Methonal-Propanol mix...
Doing some frame modding to get the engine and chain to fit.
here are the 10in oldschool mad JDM GSR blades, ultralite, and ultra sexy, in flat black, with the super ***** rubber tires inlfated to 35psi. I have to drill out 3 holes to drive a bolt through it to bolt up the sprocket gear..
Here i am preppipng and drilling out the sprocket, so it mounts up to the wheel.
Heres the tire mounted up, I spent about an hour or so making sure the sprocket was aligned perfectly to the wheel, as i didnt want that bitch breaking off and catching my ankles, i also crushed the frame a little to give the chain more clearance.
heres the engine bolted down and welded to the frame, its a close fit, but its in there.
Heres a top view, the engine sits a little to high... actually i made the seat to low... but who gives a ----... warms your *** up on those long midnight runs....
My camera ran out of batteries so i didnt take any pics of the seat fabrication process.
well here is the finished product. flat black for that sleeper look
Ready to roll...... either standing up or in full cruisermode.
SO i take this bitch out on its first run and i fucked up the bearings, cause the axle wasnt bolted down hard enough... got some new bearings and tigtened that ---- up....i took it out on the main street and i would say that ---- gets up to like 30-40mph.... i had a hard time stopping it with those cheap *** rubber pads... im going to fabricate some sort of foot pedal activated roller stopper, and a loud *** fart cannon with a 2 foot pipe
Well it was fun and hopefully more people do crazy ---- like this...
#9
Re: My HMT CHopper, AKA *** The NuttKruncher*** pics beatch...
Thats one fine piece of work you got there Albert. I'm honor that my work got someone else to venture into the wide underground world of minority built ghetto scooter modifying. I call my scooter the Rez Runner.