HomemadeTurbo - DIY Turbo Forum - My HMT CHopper, AKA *** The NuttKruncher*** pics beatch...

Well after viewing Stillnoturbo's, thread about his weedwacker powered scooter, I was in the garage and got inspired to build something.....I had a scooter, and a gay ass gokart i didnt use anymore. I told my wife and family what i was going to do and they all thought i was nuts

but i built it anyways

Attachment 33929
Royce union makes the gayest looking scooters..in homo-ass orange.

Attachment 33930
heres the donor, powerkart something or other... this thing is fun, not very fast, but fun... i hate the bicycle handbars for a steering wheel, but you can drift this bitch on the blacktop, or very smooth cement.

Attachment 33931
I plucked the motor, throttle cable, tranny, chain, and gears.

Attachment 33932
43CC's of 2-stroke fury.... this little bitch packs a punch... its basically a toy but it hauls ass, especially when i run it on a special Methonal-Propanol mix...

Attachment 33933
Doing some frame modding to get the engine and chain to fit.

Attachment 33934
here are the 10in oldschool mad JDM GSR blades, ultralite, and ultra sexy, in flat black, with the super chink rubber tires inlfated to 35psi. I have to drill out 3 holes to drive a bolt through it to bolt up the sprocket gear..

Attachment 33935
Here i am preppipng and drilling out the sprocket, so it mounts up to the wheel.

Attachment 33936
Heres the tire mounted up, I spent about an hour or so making sure the sprocket was aligned perfectly to the wheel, as i didnt want that bitch breaking off and catching my ankles, i also crushed the frame a little to give the chain more clearance.

Attachment 33937
heres the engine bolted down and welded to the frame, its a close fit, but its in there.

Attachment 33938
Heres a top view, the engine sits a little to high... actually i made the seat to low... but who gives a ----... warms your ass up on those long midnight runs....

http://img.photobucket.com/albums/v3...chopper006.jpg
My camera ran out of batteries so i didnt take any pics of the seat fabrication process.

Attachment 33939
well here is the finished product. flat black for that sleeper look

Attachment 33940
Ready to roll...... either standing up or in full cruisermode.

SO i take this bitch out on its first run and i fucked up the bearings, cause the axle wasnt bolted down hard enough... got some new bearings and tigtened that ---- up....i took it out on the main street and i would say that ---- gets up to like 30-40mph.... i had a hard time stopping it with those cheap ass rubber pads... im going to fabricate some sort of foot pedal activated roller stopper, and a loud ass fart cannon with a 2 foot pipe

Well it was fun and hopefully more people do crazy ---- like this...