hx55.. will it need bracing?
#21
Re: hx55.. will it need bracing?
Originally Posted by rprznt
complex at a guess T6. is it a large T3 shaped undivided flange? pics, measurements?
no such thing as t5 or t66 flanges. t5 is a 5spd rwd tranny, and the t66 is one of the larger t4 frame garrett compressor wheels.
dan.
no such thing as t5 or t66 flanges. t5 is a 5spd rwd tranny, and the t66 is one of the larger t4 frame garrett compressor wheels.
dan.
next to the holset, a t4 flange.
on top of holset, t4 flange. PORTS are the same size, thats why i thought it was a t4...
#22
Re: hx55.. will it need bracing?
holset w/ t4 flange
vg30det mani with a t66 flange, looks like i have a winner, but ebay is saying the t4 and the t66 are the same flange, along with t04b's and ----
Originally Posted by ebaychingchong
T4 T-4 Turbo Weld Flange for T04, T04b, T04r, T70, T66
#23
Re: hx55.. will it need bracing?
Originally Posted by c0mpl3x
2.5/3.0 bmw's have spooled it, fearsomedan spooled it, numerous other setups have spooled it.. list goes on.
those motors are spinning 7500
the I-6 is rapping out at 4k
i drove one of those trucks today and started thinking about your build. when i shifted at 4500rpms (near death). and shift to second it falls to 2200ish. i'm wondering how much of a powerband you will have on that truck. the one i drove was a 5 speed fuel injected one not that i think it matters, just thought i'd mention
#24
Re: hx55.. will it need bracing?
Originally Posted by c0mpl3x
vg30det mani with a t66 flange, looks like i have a winner, but ebay is saying the t4 and the t66 are the same flange, along with t04b's and ----
the t6 turbine flange is common on the large frame garrett turbos like the TV8101 and similar
so i assume its a divided t6 flange?
it appears the t6 bolts will line up,but the ports on the turbo look small - t4 size. time fo some turbo porting to match the flange
#25
Re: hx55.. will it need bracing?
Originally Posted by bitchasscracker
those motors are spinning 7500
the I-6 is rapping out at 4k
i drove one of those trucks today and started thinking about your build. when i shifted at 4500rpms (near death). and shift to second it falls to 2200ish. i'm wondering how much of a powerband you will have on that truck. the one i drove was a 5 speed fuel injected one not that i think it matters, just thought i'd mention
a ported upper intake to match a 302 twin throttle body will make the ****** really come alive.. even moreso with a 4 barrel carb.
cams, springs, and rods are the 3 big limitations on the engine, outside of small *** throttle body plates (32mm iirc) or one single carb with a 1 3/4" throttle plate.
#26
Re: hx55.. will it need bracing?
Originally Posted by c0mpl3x
the size of the intake/exhaust ports, they're basically rectangles 1.5" wide, almost 2" tall. porting wont help much.. theres no rpm's to really make a difference.
a ported upper intake to match a 302 twin throttle body will make the ****** really come alive.. even moreso with a 4 barrel carb.
cams, springs, and rods are the 3 big limitations on the engine, outside of small *** throttle body plates (32mm iirc) or one single carb with a 1 3/4" throttle plate.
a ported upper intake to match a 302 twin throttle body will make the ****** really come alive.. even moreso with a 4 barrel carb.
cams, springs, and rods are the 3 big limitations on the engine, outside of small *** throttle body plates (32mm iirc) or one single carb with a 1 3/4" throttle plate.
cool i hope it turns out gangster i'm really looking forward to how this turns out
#27
Re: hx55.. will it need bracing?
Originally Posted by bitchasscracker
cool i hope it turns out gangster i'm really looking forward to how this turns out
#29
Re: hx55.. will it need bracing?
Originally Posted by E-b0la
lol my snowmobile has 3 36mm carbs. damn that's small.
#30
Re: hx55.. will it need bracing?
90mm tb off a Q45 can be found for $20-90 on ebay depending on your sniping skills.
that looks like the size of flange that was on a gigantic 70's garret off an international harvestor i bought at an industrial equipment suprlus yard one time.
that looks like the size of flange that was on a gigantic 70's garret off an international harvestor i bought at an industrial equipment suprlus yard one time.