Haw do I make a OIL BREATHER CATCH CAN....any tips please
09-01-2008, 04:13 AM
#11
1.0 BAR
Join Date: Mar 2008
Location: Renton, WA
Posts: 636
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
It will run as much as fuel system will let 23-26psi
1000ccs, walbro 255 for now, and GTK 650 Turbonetics.
1000ccs, walbro 255 for now, and GTK 650 Turbonetics.
09-01-2008, 04:20 AM
#12
1.5 BAR
Thread Starter
Join Date: Jun 2005
Posts: 735
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
Originally Posted by BoostForLife
It will run as much as fuel system will let 23-26psi
1000ccs, walbro 255 for now, and GTK 650 Turbonetics.
1000ccs, walbro 255 for now, and GTK 650 Turbonetics.
09-01-2008, 04:31 AM
#13
1.0 BAR
Join Date: Mar 2008
Location: Renton, WA
Posts: 636
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
Eagle stroker kit and darton sleeves.
09-01-2008, 04:34 AM
#14
1.5 BAR
Thread Starter
Join Date: Jun 2005
Posts: 735
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
Originally Posted by BoostForLife
Eagle stroker kit and darton sleeves.
09-01-2008, 04:43 AM
#15
1.0 BAR
Join Date: Mar 2008
Location: Renton, WA
Posts: 636
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
Same tuner as mine.
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros
09-01-2008, 04:50 AM
#16
1.5 BAR
Thread Starter
Join Date: Jun 2005
Posts: 735
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
Originally Posted by BoostForLife
Same tuner as mine.
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros
09-01-2008, 04:39 PM
#17
1.5 BAR
Thread Starter
Join Date: Jun 2005
Posts: 735
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
Any tips haw do I make my HomeMade Oil Breather Catch Can....
?
?
09-02-2008, 12:06 AM
#18
3.0 BAR
Join Date: Sep 2004
Posts: 1,588
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
Originally Posted by BoostForLife
Here's my brother's setup. Don't remember what site he ordered it at.
2 go to the valve cover and the other 2 are for back of the block where you normally see the 2 huge plugs. Original PCV hole is blocked off with a Z10 plug.
2 go to the valve cover and the other 2 are for back of the block where you normally see the 2 huge plugs. Original PCV hole is blocked off with a Z10 plug.
If you're going to go through the bother of putting in a catch can, run a tee to two check vavles. One to vac of mani, one to slash cut in exhaust, done.
09-02-2008, 12:14 AM
#19
1.5 BAR
Thread Starter
Join Date: Jun 2005
Posts: 735
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
thats what i have right now and it dosen't help.... 
09-02-2008, 02:41 AM
#20
1.0 BAR
Join Date: Mar 2008
Location: Renton, WA
Posts: 636
Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
Unlike me, my brother is a baller and buys top of the line ----. I don't even have a catch tank in my sol, it's just shooting all the ---- sraight to the ground.
