Haw do I make a OIL BREATHER CATCH CAN....any tips please
Originally Posted by BoostForLife
It will run as much as fuel system will let 23-26psi
1000ccs, walbro 255 for now, and GTK 650 Turbonetics.
1000ccs, walbro 255 for now, and GTK 650 Turbonetics.
Same tuner as mine.
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros
Originally Posted by BoostForLife
Same tuner as mine.
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros
Originally Posted by BoostForLife
Here's my brother's setup. Don't remember what site he ordered it at.
2 go to the valve cover and the other 2 are for back of the block where you normally see the 2 huge plugs. Original PCV hole is blocked off with a Z10 plug.


2 go to the valve cover and the other 2 are for back of the block where you normally see the 2 huge plugs. Original PCV hole is blocked off with a Z10 plug.


If you're going to go through the bother of putting in a catch can, run a tee to two check vavles. One to vac of mani, one to slash cut in exhaust, done.
Unlike me, my brother is a baller and buys top of the line ----. I don't even have a catch tank in my sol, it's just shooting all the ---- sraight to the ground.



?