Re: Fabricating your own exaust AFTER the down pipe...
 

front page material

Re: Fabricating your own exaust AFTER the down pipe...
 

I use the jackstands, keep the jack under, and throw some blocks/wood under the car to be extra careful.

Re: Fabricating your own exaust AFTER the down pipe...
 

I never used jack stand's, untill i was working under the car. climbed out from under it went in the house to get something to drink. when i came back out the jack had turned over some how and came out from under the car and the car was sitting on the ground and i had both front wheel's off. So yea that would have sucked.

Re: Fabricating your own exaust AFTER the down pipe...
 

:o :o :o

Re: Fabricating your own exaust AFTER the down pipe...
 

for most things i dont need jackstands. only needed one to flex my worn out stock suspension to drop my oil pan

Re: Fabricating your own exaust AFTER the down pipe...
 

I don't need to jack my car up at all to do exhaust work. I have a 6 foot deep pit in my garage...pull the car up over the pit, walk down the stairs into the concrete hole, and proceed to tack weld the pipes together. ;D

Re: Fabricating your own exaust AFTER the down pipe...
 

Garage pit eh?

I tack weld it with the crap on the car. Pull it off and weld it properly off the car:

http://lakebox.dnsalias.com/photos/1...d/med/exh2.jpg

Re: Fabricating your own exaust AFTER the down pipe...
 

im scared to go in our pit with a welder...we spray too much brake clean and there is entirely too much oil on the floor. id never make it out alive...

Re: Fabricating your own exaust AFTER the down pipe...
 

lol i jack my cars up that high...thats standard poor man's engine swap height right there