Re: Fabbed up my first dP
Well when the car is done acouple of my boys were gunna cruz up there for some off your night races prov is getting to hot
|
Re: Fabbed up my first dP
what night races in newport ? where did you get that idea? good luck the Dp has pinhole leaks written all over it
|
Re: Fabbed up my first dP
o-well i say ---- it only way to learn is to do it but i def wouldnt mine getting togeather the car will prolly be runing again this week i have to throw in the 2.5 bar and 880's and start my tune. im always up for new tips and ---- how did that topmount come out?
|
Re: Fabbed up my first dP
------- sweet i started a new one that destroys my first one .........you tune?
|
Re: Fabbed up my first dP
there not perfect but they run decent i keep everything conservitive though some vids are on youtube search is RI Street Racing i have the 99 si not bad on 7psi im hoping to see 15-18 this weekend
|
Re: Fabbed up my first dP
get rid of your hf flux, go get some tractor supply flux. it's much better than the stock roll, .030 flux will work. how far from the work is your tip? wire wheel off the alumized coating, and go over the flux before you run a second bead.
|
Re: Fabbed up my first dP
to get a consistant ark im about 1inc to 3/4 inch off any closer i burn threw but this is all on high nextime ill go low and pick up wire speed
|
Re: Fabbed up my first dP
1 Attachment(s)
Look close at the joints. Namely near the filter. That weld was done with a canadian tire special flux core welder. For such a cheap ass welder that was given to me... The machine can weld nicely. I've made numerous exhausts for friends and air intakes with it. Clean your metal and clean your welds after. Chizzle and wire wheel. I did not use any grinding disk. Just wire wheel.
Attachment 20014 |
Re: Fabbed up my first dP
clean ass ---- thanks for all the tips
|
Re: Fabbed up my first dP
he go. so long as it works
|
All times are GMT -5. The time now is 02:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands