Custome je pistons with ls wrist pins
10-06-2006, 09:34 AM
#1
3.0 BAR
Thread Starter
Join Date: Feb 2006
Posts: 3,906
Custome je pistons with ls wrist pins
like it says I got a sweet deal on a set of JE forged pistons for $66 for my set up, bearly used still look brand new. the problem is they where for a custome build and where for a half assed build. they where made to take the LS pins. If I bore out my TT rods to the ls pin specs do u think they would hold good power in the rods? im looking to get 400 to 500whp at the end of thin build
lets see your .02
lets see your .02
10-06-2006, 07:39 PM
#4
1.5 BAR
Join Date: Oct 2004
Posts: 1,167
Re: Custome je pistons with ls wrist pins
there might be a metalurgic difference between the oem wrist pins and the JE ones...I would worry more about that than the rod strength after having the rods bored a tiny bit.
thats my .02.
thats my .02.
10-06-2006, 08:31 PM
#5
3.0 BAR
Thread Starter
Join Date: Feb 2006
Posts: 3,906
Re: Custome je pistons with ls wrist pins
well just looking at a d15 piston and rod and the je the je opening is a lot bigger I still have to mic it.
but the pistons slip into my block perfect its just the pin sizes
but the pistons slip into my block perfect its just the pin sizes
10-07-2006, 03:37 AM
#7
0.0 BAR
Join Date: Oct 2004
Posts: 0
Re: Custome je pistons with ls wrist pins
Couldn't you just use LS rods? I thought you D16 guys would swap LS rods over (boring it out for the wrist pin). That would mean the crank is about the same size, no? I'm still kinda new to Honda/Acura, so please correct me if I'm wrong.
10-07-2006, 11:05 PM
#8
1.0 BAR
Join Date: May 2005
Posts: 282
Re: Custome je pistons with ls wrist pins
Originally Posted by Snafubmx234
Couldn't you just use LS rods? I thought you D16 guys would swap LS rods over (boring it out for the wrist pin). That would mean the crank is about the same size, no? I'm still kinda new to Honda/Acura, so please correct me if I'm wrong.
10-07-2006, 11:37 PM
#9
0.0 BAR
Join Date: Oct 2004
Posts: 0
Re: Custome je pistons with ls wrist pins
Originally Posted by Fallen86
yes but he wasnts 400-500hp, the ls rods would only take 300 or so. still good enough for me! sell em to me! :P
