thats crazy!!! you better wear a diaper.. just in case!!!!!!! :)
|
any updates on this build?
|
still havin boost controll probs .want it sorted before i get it mapped.think its down to length and diameter of wastegate signal hose.changed to 6mm id,as short as possible.also running a 6 psi spring.i was using a 3 psi and a bleed valve to up the boost to 6 but it wouldnt hold steady boost.hopefully a ride tomoz will show some improvement...
got a camera so i will post a vid when i work out how to use it;D |
result.!!
without the boost controller and with a 6 psi spring it holds steady boost. it seems the boost controller disrupts air flow to the wastegate giving an uneven signal..need to find a good cheap controller now |
where are you getting your boost signal for the wastegate?
|
the signal is from the compressor housing..the problem is deffo the boost controller cos without it the boost gauge needle is rock solid...
|
run the boost signal from the intake plenum. its more accurate and responsive. boost builds up from the plenum and travels to the compressor so there is a slight delay in the opening of the wastegate. this will also cause a sudden boost spike.
|
cheers for the info mate.... i will try that...could i take a signal from the throttle boddies
|
Originally Posted by turbosnail
(Post 1308807)
cheers for the info mate.... i will try that...could i take a signal from the throttle boddies
|
do you think there would be any noticeable difference between a signal from the plenum and the tb,s
|
All times are GMT -5. The time now is 03:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands