Here's the clip: http://www.codyberman.com/car.wav

No throttle. the pulsing sound is the car wanting to die from being so rich. then at the very end i revved it a bit and the noise subsides a little

 

JD what MAP sensor is your tune set for. 2.5bar? We found the noise. The flywheel teeth are coming apart from the aluminum part of the flywheel

 

yea...rawr came over and gave me a hand. it seems that im a total dumbass and completely screwed up the fuel mult on the map i thinik,but the noise is certainly from the flywheel.

if u grab ahold of the teeth and shake em around.

 

Yeah, I wasn't reading anything that made me go "whoa," and the .wav sounded like open dp + exhaust ticking.

I should have both stock MAP sensor and 2.5 bar Y8 tunes up on xeno's site. Crome 1.2.0.24 (NOT 1.2 Final, that is a glitchy piece of poop last I heard) with FVFT 1.99RC4 and ABT+ 2.0.

 

I also thought it was the downpipe ticking on something when the engine started to bog. It also kinda sounded like it was coming from the turbo until i got under the car and could hear it was the fly wheel. The teeth on the flywheel are litterly loose and jiggling around, seperate from the alumnium.

 

What brand flywheel?

 

I'm not sure. He got it from lsd.

 

It's whatever lsd sells, although mike has been awesome thus far, and very willing to replace it. thumbs up to lsd.

 

Yah him and TTs FTW.

 

Okay. finished up the clutch job, so all that shiz is done. Now it's just running ultra rich. . When ever i change the fuel multiplier from 550 (old) to 450(new) and save it reverts back to 240(old) 196(new).. could that be a problem? otherwise, any ideas on what to try to see why its running so ------- rich?

btw, using j davis' map with the same software versions he is running