Y8 manifold..can you use a Z6 fuel rail on it?
09-19-2005, 02:12 AM
#3
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
Re: Y8 manifold..can you use a Z6 fuel rail on it?
Originally Posted by darksol2005
i'm not sure if it can or not, but if it can i've got a z6 rail for sale if you want it
dammit. anyone know if a Y7 will fit
09-20-2005, 03:42 AM
#6
3.0 BAR
Join Date: May 2004
Posts: 5,042
Re: Y8 manifold..can you use a Z6 fuel rail on it?
The FPRs are on opposite ends, they are also not interchangeable.
There is a half moon cut out of the Z6 where one of the Y8 mounting studs should go.
Just did the swap a few months back, so I had to do the same thing.
Rememer to get a longer fuel return line as the FPR moves to the passenger side of the rail.
There is a half moon cut out of the Z6 where one of the Y8 mounting studs should go.
Just did the swap a few months back, so I had to do the same thing.
Rememer to get a longer fuel return line as the FPR moves to the passenger side of the rail.
09-23-2005, 07:31 AM
#7
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
Re: Y8 manifold..can you use a Z6 fuel rail on it?
Originally Posted by Cray91
The FPRs are on opposite ends, they are also not interchangeable.
There is a half moon cut out of the Z6 where one of the Y8 mounting studs should go.
Just did the swap a few months back, so I had to do the same thing.
Rememer to get a longer fuel return line as the FPR moves to the passenger side of the rail.
There is a half moon cut out of the Z6 where one of the Y8 mounting studs should go.
Just did the swap a few months back, so I had to do the same thing.
Rememer to get a longer fuel return line as the FPR moves to the passenger side of the rail.
09-23-2005, 12:32 PM
#8
3.0 BAR
Join Date: May 2003
Posts: 6,279
Re: Y8 manifold..can you use a Z6 fuel rail on it?
Originally Posted by julio_bOOstamante
Originally Posted by Cray91
The FPRs are on opposite ends, they are also not interchangeable.
There is a half moon cut out of the Z6 where one of the Y8 mounting studs should go.
Just did the swap a few months back, so I had to do the same thing.
Rememer to get a longer fuel return line as the FPR moves to the passenger side of the rail.
There is a half moon cut out of the Z6 where one of the Y8 mounting studs should go.
Just did the swap a few months back, so I had to do the same thing.
Rememer to get a longer fuel return line as the FPR moves to the passenger side of the rail.
a few more thing.
1)flip the stock TB cable bracket upside down and sue one of them bolt to mount.
2)you need a longer FPR to manifold hose.
3)PCV hose needs to be extended.
09-26-2005, 02:35 AM
#9
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
Re: Y8 manifold..can you use a Z6 fuel rail on it?
Originally Posted by Donald125
Originally Posted by julio_bOOstamante
Originally Posted by Cray91
The FPRs are on opposite ends, they are also not interchangeable.
There is a half moon cut out of the Z6 where one of the Y8 mounting studs should go.
Just did the swap a few months back, so I had to do the same thing.
Rememer to get a longer fuel return line as the FPR moves to the passenger side of the rail.
There is a half moon cut out of the Z6 where one of the Y8 mounting studs should go.
Just did the swap a few months back, so I had to do the same thing.
Rememer to get a longer fuel return line as the FPR moves to the passenger side of the rail.
a few more thing.
1)flip the stock TB cable bracket upside down and sue one of them bolt to mount.
2)you need a longer FPR to manifold hose.
3)PCV hose needs to be extended.
