HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   WTF with ecu chipping (https://www.homemadeturbo.com/engine-management-10/wtf-ecu-chipping-95949/)

Tom-Guy 10-12-2008 11:34 AM
Re: WTF with ecu chipping
 
Originally Posted by hard2obtain
Note: Bought parts on an electronic store
2 0.1 UF disc capacitors
1 10 KOHM resistor (1/4 watt)
1 nte74hc373
The problem is obvious. FYI I don't even bother with the caps, you only need them for glitchy Hondata daughterboards and nobody runs that poorly designed product anymore.

hard2obtain 10-12-2008 05:19 PM
Re: WTF with ecu chipping
 
Originally Posted by Joseph Davis
The problem is obvious. FYI I don't even bother with the caps, you only need them for glitchy Hondata daughterboards and nobody runs that poorly designed product anymore.
Nice hint, a friend of mine didnīt use it either. Then, only need the 28pin, 74hc373, jumper and 10k resistor to make it works?

Then Im going to remote it, maybe it works

onlyflash944 10-12-2008 07:40 PM
Re: WTF with ecu chipping
 
i wish my honda would run at 45k :-[

turbo4life 10-12-2008 08:48 PM
Re: WTF with ecu chipping
 
Originally Posted by hard2obtain
Nice hint, a friend of mine didnīt use it either. Then, only need the 28pin, 74hc373, jumper and 10k resistor to make it works?

Then Im going to remote it, maybe it works
1 to 1.2 k risistor

Tom-Guy 10-12-2008 11:46 PM
Re: WTF with ecu chipping
 
You learned to read. ------- gives me a warm fuzzy, bro. :y

turbo4life 10-13-2008 02:11 AM
Re: WTF with ecu chipping
 
;)

hard2obtain 10-13-2008 02:27 AM
Re: WTF with ecu chipping
 
Originally Posted by turbo4life
1 to 1.2 k risistor
1k or 10k resistor is needed?

Tom-Guy 10-13-2008 10:52 AM
Re: WTF with ecu chipping
 
FAIL

JonDouglas 10-13-2008 08:43 PM
Re: WTF with ecu chipping
 
Originally Posted by hard2obtain
1k or 10k resistor is needed?
1.0 K ohm to 1.2 K ohm resister is needed. How is that hard to understand?

That is 1000-1200 ohms.

The stripe colors will be brown, black red (1K ohm) or brown, red, red (1.2K ohm) and then whatever tolerance you choose.

I use 1 K ohm 1/8 watt resisters w a 5% tolerance. That would be a brown, black, red gold stripe combination.


All times are GMT -5. The time now is 03:15 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands