Re:willem chip burner help
 

God damn that's a ghetto ass burner. :P

Good luck with that. I always have a hell of a time getting those damn things to work. Last time I checked mine still works so I'm not touching it. :-\

If that jumper wire ---- doesn't work out for you, try ------- with the software a bit. Open ---- and run ---- and restart your computer. That's what I did and it worked. ???
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:willem chip burner help
 

in red are little jumper posts and the green is a little 4 switch thing:

http://2.pichold.com/eh.jpg

I don't know which jumper in the screen shot is which jumper in the picture. my burner is a 3.1. if it doesn't work after all the checks you listed then I'm going to try to dl a different software from the website and see if that helps.

Re:willem chip burner help
 

Throw that load in the trash and buy a MOATES!

Re:willem chip burner help
 

thanks for the help, your contribution here on hmt is really appreciated.

Re:willem chip burner help
 

Sorry couldn't help myself. Have you tried a different chip? It sounds like the first address is bad or missing.

Re:willem chip burner help
 

I'm pretty sure it's just the jumpers aren't set right and I don't know how to set them. spenser recommended a moates to me, I would have gotten one instead of this, but all I knew about at the time was willem and batronix. if friday rolls around and I still don't have a chip burned I'll sell this one and get a moates.

Re:willem chip burner help
 

I finally just got mad and started clicking on different things and then hitting program chip and it finally did it. we'll test this biatch out on the car tomarrow sometime.

Re:willem chip burner help
 

dude, just find out what sofware is reccomended for the 3.1 and see where to set the jumpers, i'm positive that's your problem. www.willem.org has forums too, ask on there. the willem is great for the price, once you figure it out :P

Re:willem chip burner help
 

Use Version 97g of the software, thats what works best. If that still doesnt fix it PM me and i'll dig mine out and check my dip switches.

Re:willem chip burner help
 

I read the site and it says set some ---- to standard position, and set this other ---- to position a18 or something. I only speak english and spanglish, none of that normal position or ----.

my software is 97 something, I'll post up what it is next time I feel like burning a chip, hopefully this chip will start my car.