Re:Who is tuning TurboEdit setup(s) with a Wideband, need semi-tuned Maps
 

As far as TE map import/export code goes.. It _shouldn't_ change too much anymore. It's a lot more flexiable than it used to be. So tunes created should be able to be used in the future. ;)

Re:Who is tuning TurboEdit setup(s) with a Wideband, need semi-tuned Maps
 

Tested the Romulator ish, and it works.

Re:Who is tuning TurboEdit setup(s) with a Wideband, need semi-tuned Maps
 

Who else has them? Comeon people....

Re:Who is tuning TurboEdit setup(s) with a Wideband, need semi-tuned Maps
 

I should have a dyno tuned y8 10psi map in about two weeks. I'm working on it. ;)

Re:Who is tuning TurboEdit setup(s) with a Wideband, need semi-tuned Maps
 

Wideband going in today...
Dyno in a few weeks for the ignition...

DOHC ZC
T3 42./.48
2.5" Downpipe
No Cat
Through Muffler
450cc
Tyrus 5" intercooler
2.5 Charge Pipes

HOWEVER...Tuning in denver subs so 6000' elevation. Prob run lean on anyone elses setups.

Re:Who is tuning TurboEdit setup(s) with a Wideband, need semi-tuned Maps
 

Sounds good...but anything is better than nothing...post up and then others can just richen the boost maps a touch. ECU fuel trim should take care of the differences in elevation for the VAC portion of the maps.

Proper timing is very helpful too... ;D

Re:Who is tuning TurboEdit setup(s) with a Wideband, need semi-tuned Maps
 

I'll have a tune for a DOHC ZC also...running a T3 .42/.36
2.5" downpipe, full 2.5" exhaust with free flowing 2.5" inlet muffler and 3.5" outlet...no CAT running 450's with 2" charge pipes and a nice sidemount intercooler.
I have an almost finished bin, but we'll confirm if it's ok this weekend with the WBO2.