Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Where the hell do i get an IAC?

Thread Tools
 
Search this Thread
 
Old 08-07-2003, 11:25 PM
  #1  
0.0 BAR
Thread Starter
 
kw1k69's Avatar
 
Join Date: Aug 2003
Posts: 10
Default Where the hell do i get an IAC?

I need to find the IAC (idle air control) valve for my car. i have a 1.6 SOHC VTECH motor and i cant find them anywhere. ive tried junk yards and the honda factory, someone please let me know where i can get one!
kw1k69 is offline  
Old 08-08-2003, 12:27 AM
  #2  
0.0 BAR
 
Tom-Guy's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re:Where the hell do i get an IAC?

1) what are your symptoms

2) can you get me a picture of yours? I have a half dozen, but they have been removed from various manifolds and I don't know what is what as far as the flanges go.
Tom-Guy is offline  
Old 08-08-2003, 11:19 AM
  #3  
0.0 BAR
Thread Starter
 
kw1k69's Avatar
 
Join Date: Aug 2003
Posts: 10
Default Re:Where the hell do i get an IAC?

I know its any d-series intake manifold. how much u want for them?
kw1k69 is offline  
Old 08-08-2003, 12:26 PM
  #4  
3.0 BAR
 
TurboEF9's Avatar
 
Join Date: Apr 2003
Posts: 2,260
Default Re:Where the hell do i get an IAC?

The IACV, or the EACV as it is commonly called is different between D-series manifolds.

They are all "compatible", but, the bolt positions are a bit different, say between 88-91 Si (D16A6), 92-95 Si (D16Z6), and the 96-98 Si (D16Y..

Now, if it's a DX manifold, all of those are going to be different..

Which manifold do you have?

Also, you can use a 10w 10ohm resistor spliced between the two wires of the EACV to remove it completely. Then just bolt your old broken one onto your manifold to "plug" the holes. You can get the resistor from RadioShack (Part number: 271-0132).

I run the resistor method on my Civic and it works perfectly. No irractic idle, or "high" idle conditions.
TurboEF9 is offline  
Old 08-08-2003, 02:10 PM
  #5  
1.0 BAR
 
ShadowRex's Avatar
 
Join Date: May 2003
Posts: 517
Default Re:Where the hell do i get an IAC?

Originally Posted by TurboEF9

Also, you can use a 10w 10ohm resistor spliced between the two wires of the EACV to remove it completely. Then just bolt your old broken one onto your manifold to "plug" the holes. You can get the resistor from RadioShack (Part number: 271-0132).

I run the resistor method on my Civic and it works perfectly. No irractic idle, or "high" idle conditions.
Oh I gatta try this..... I bet that would help my problem with the bouncy idle
ShadowRex is offline  
Old 08-08-2003, 02:47 PM
  #6  
0.0 BAR
Thread Starter
 
kw1k69's Avatar
 
Join Date: Aug 2003
Posts: 10
Default Re:Where the hell do i get an IAC?

I have the si model its a d16z6 ...
kw1k69 is offline  
Old 08-09-2003, 01:01 PM
  #7  
3.0 BAR
 
TurboEF9's Avatar
 
Join Date: Apr 2003
Posts: 2,260
Default Re:Where the hell do i get an IAC?

I have a Z6 IACV I'll sell you if Joseph doesn't have one.. Check with him first.
TurboEF9 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kain
General Discussion
13
01-17-2005 03:26 PM
kain
General Discussion
9
10-27-2004 10:41 AM
fork
Hybrid/Tech
7
04-21-2003 10:48 AM
P-Dawg
Hybrid/Tech
2
03-23-2003 10:39 PM



Quick Reply: Where the hell do i get an IAC?



All times are GMT -5. The time now is 04:44 PM.