VTEC on p06 without adding anything
#1
VTEC on p06 without adding anything
Now, i dont write the software, but i was wondering, why can't we do vtec without using the p28 extra's, i have chipped a couple p06's and added vtec and i hate doing it... so i was thinking, why not use the AC out for vtec? but some code would need to be written.. Any comments would be welcome.
#4
Re: VTEC on p06 without adding anything
Originally Posted by CSaddict
I converted my P06 to a P28 in about 25 mins. Take longer to write the code.
#5
Re: VTEC on p06 without adding anything
Originally Posted by projekteg
Originally Posted by CSaddict
I converted my P06 to a P28 in about 25 mins. Take longer to write the code.
I'm not dumb, and as i have stated, I hate doing the p06-p28 conversion. It would help ALOT of people out to strait up be able to just repin 1 pin and BAM they have vtec. And if you are a good code wrighter, you would have no problem doing this in 25 minutes.
It would be nice to have for everyone that is cheap out their (like 99% of hmt) VTEC pressure switch's are for pussies. Why have one? if your motor is out of oil you should know ;-) and if your not getting oil pressure your idiot light will come on and if you dont have the idiot light hooked up then why are you worrying about the vtec pressure?
I dunno, i just see it as an easy alternative, And i bet many others would to.
oh, and if i remember correctly, all the vtec pressure switch stuff is already in the ecu, your not adding anything for that. ( I'm not positive, but i think so)... Right there you could already have vtec pressure if thats right :-)
#6
Re: VTEC on p06 without adding anything
here ya go, my present to you josh. use acc or pcs to activate vtec via one wire
obd1 one wire vtec
i personally would rather take the 15 minutes to convert the ecu to a fully functional p28, then you can run any obd1 program and still have vtec with no wiring.
obd1 one wire vtec
i personally would rather take the 15 minutes to convert the ecu to a fully functional p28, then you can run any obd1 program and still have vtec with no wiring.
#7
Re: VTEC on p06 without adding anything
Originally Posted by projekteg
here ya go, my present to you josh. use acc or pcs to activate vtec via one wire
obd1 one wire vtec
i personally would rather take the 15 minutes to convert the ecu to a fully functional p28, then you can run any obd1 program and still have vtec with no wiring.
obd1 one wire vtec
i personally would rather take the 15 minutes to convert the ecu to a fully functional p28, then you can run any obd1 program and still have vtec with no wiring.
thank you, and you will still have wiring on obd 1 cars, just not 92's... all 93-95's you have to add the wire.
-Josh
#9
Re: VTEC on p06 without adding anything
Originally Posted by Random Hero
thank you, and you will still have wiring on obd 1 cars, just not 92's... all 93-95's you have to add the wire.
-Josh
-Josh
Originally Posted by Random Hero
oh yeah, and with the nitrous script, does it switch to the vtec map?
#10
Re: VTEC on p06 without adding anything
Originally Posted by projekteg
...therfore pretty much require support from a different program other than turbo edit.