tek_civic

Bad tunes are pretty bad too

I had a fmu on my old b16t, ran ok and pushed boost to the normal 6-8. For me it was a great temporary and very simple solution. I mean plug in a vacumme line mount the fmu and your done. i see it like a carburator, only worse. with this it giving a set amount of fuel up and down the rpm band (relative to boost).

After i wanted more options i went and bought one of the first sub 800$ widebands (innovate LM1 i think it was), and some 450cc dsms. ran the hack for about another year at max of about 11-14 psi on b16 and ls/vtec. all street tune, colder plugs. dynod something like 215 (really small turbo )

that was years ago and now it is much easier to get chips done and base maps that dont suck.



although i know and have run previous ghetto methods end result is i will not do it again. my next setup will be chip and tune. once you have that its just simple. and these days the cost is about the same

hard2obtain

I must say, you need to read first the FAQ section of this Engine Management forum, there´s the questions of almost all your answers

hard2obtain

Also if you want to regulate your FMU i did a brief HOW TO do that

vortecfiero

the biggest problem with one of these is the fact that one day "low boost" wont be enough
and you will crank it up to the next level...
with chipping someones been there done that and has a chip or what ever to set you up trouble free

been there done that... didn't blow up my engine

taiajam

2x

i actually used a 12:1 fmu, stock fuelpump and chipped my ecu and tuned it with turboedi and also used the FMU. 5 psi. stock injectors.

i had 450cc injecotrs but 2 were somehow not injecting because they layed on the self for 2 years.

KINGCOQUI

YEAH DUDE GET A CHIPPED ECU I RAN A FMU IN MY TEG AND CHANGED THE MOTOR 2 TIMES UNTIL I GOT MY ECU CHIPPED BY XENOCRON DID NOT HAVE A PROBLEM AFTER THAT SO SAVE YOUR MONEY AND GET IT