HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Vortech FMU.. (https://www.homemadeturbo.com/engine-management-10/vortech-fmu-91994/)

94civik 05-15-2008 12:32 AM

Vortech FMU..
 
Should i just use it? I dont have the cash to get a chip/tuning right now.. unless someone has a hook up!

Someone give me some pros/cons!!

94civik 05-15-2008 12:40 AM

Re: Vortech FMU..
 
Ok, well i just went though some readings, and if im only boosting like 7psi i should be fine..

turbo dave 05-15-2008 01:29 PM

Re: Vortech FMU..
 

Originally Posted by 94civik
Ok, well i just went though some readings, and if im only boosting like 7psi i should be fine..

fmu bad

chipped ecu good.

Jorsher 05-16-2008 12:23 PM

Re: Vortech FMU..
 
Spend the cash now for a chipped ECU and proper tune.

Or spend the cash later for a new engine.

veracity 05-22-2008 08:47 PM

Re: Vortech FMU..
 
you talking honda? if you're doing the reading, you know that most of everyone on here is anti-fmu because they're unreliable, unpredictable, and not tune friendly. it's seriously not that hard or much to find a socketed ecu on here, and xenocron can hook you up with a reliable basemap for next to nothing. fmu was the answer back when options were limited and expensive as ----. there are so many other options now. on the other hand, there are a few guys out there that have run fmu's for miles and miles without a problem. if you've already got it in your head that you're gonna use the fmu no matter what, just expect to be thrashed if in a short time you're posting a "my ---- blew up. why?" thread.

ghettoturbo 05-22-2008 08:58 PM

Re: Vortech FMU..
 
for low boost, an fmu with a decent pump will work fine imho. But i mean LOW boost, dont get greedy. Back in the day i beat the snot out of a sohc i had running like 6 psi with an fmu.

cdscivic 05-23-2008 08:46 AM

Re: Vortech FMU..
 
these guys convinced me to get a chipped ECU and ditch my ganster ass E Manage and AFC Hack i was considering. DO it.

When you get the chipped ECU and base maps (cheap on xenocrons website) its not much more to get a mild tune to check your A/f and ignition to make sure your good to go.

(Did i do/say that right guys? lol)

biscuit 05-29-2008 07:39 PM

Re: Vortech FMU..
 

Originally Posted by ghettoturbo
for low boost, an fmu with a decent pump will work fine imho. But i mean LOW boost, dont get greedy. Back in the day i beat the snot out of a sohc i had running like 6 psi with an fmu.

I ran one for a year and a half at 5 pounds on a D engine. Stock pump and all. I never had any problems but I'm moving on to bigger and better things now.
I'd say go for it but keep the boost at or below 5 pounds which was hard trust me... ;D

pissnuts 06-06-2008 03:37 AM

Re: Vortech FMU..
 

Originally Posted by turbo dave
fmu bad

chipped ecu good.

at 7psi your just fine i have seen cars run for years on fmu's :6

RandysSOHC 06-12-2008 02:13 AM

Re: Vortech FMU..
 
i bust 10psi .been 11 for the past year
stock d15b8
every day

burnin it up
(*knock on wood)

inline fuel pump, 12:1 fmu,

use it IMO

but I wish I could be chipped with a built bottom end


All times are GMT -5. The time now is 01:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands