I'm messing around with the uberdata program, right now, I got all my parts, chip burner, ecu chippied, program and all. I havent burn a chip yet since I'm in Iraq, and all I got with me is my laptop, and the uber program, I made a couple of basemaps with 450cc injectors, 3 bar map, and 52 psi fuel pressure,,,everthing looks fine, but I don't if I have to do anything else other than selecting the 3 bar map options, I did my research and all, thats why you don't see me a lot anymore, I'm on the uber forum. but is there anything that I need to do with the basemap to make sure the 3 bar will work properly? and also, what is the PA sensor,and ELD sensor? but any help on the 3 bar option is apreciated.. as I said before, I'm just testing havent burned a chip, or test a chip yet. just getting my ---- straight before I come home.

 

PA is atmospheric pressure sensor. If you have a US ECU leave this checked. JDM ecu's dont have em'. Basically if your ECU has a tall black looking thingy right next to the socket, leave the PA box checked.

ELD is the electrical load detector. Leave this checked as well. If you did an OBD0-1 swap or your car throws a code 20 then disable it.

 

thanks a lot! do you have anything about the 3 bar map sensor? do I just select the 3 bar option, and that it is good for that part or what?