Turboedit - startup idle is HIGH then idle drops and drops and drops
#1
Turboedit - startup idle is HIGH then idle drops and drops and drops
Trying to figure out just out of boost timing on a D16a6 and idle Im having trouble with
On cold start, the idle jumps to 1500 or so, with open downpipe is just to annoying and unnessesary. So it warms up and drops and drops and drop
Slowly until it get to like 500 or so
you can get out and adjust the idle screw and raise it to like 750, then it idles some more and keeps dropping!!!
motor never stalls out but its pretty ------- annoying
This is on a d16a6 running turboedit and dsm 450's and a gm 3 bar
Need some help
On cold start, the idle jumps to 1500 or so, with open downpipe is just to annoying and unnessesary. So it warms up and drops and drops and drop
Slowly until it get to like 500 or so
you can get out and adjust the idle screw and raise it to like 750, then it idles some more and keeps dropping!!!
motor never stalls out but its pretty ------- annoying
This is on a d16a6 running turboedit and dsm 450's and a gm 3 bar
Need some help
Thread
Thread Starter
Forum
Replies
Last Post
1jdmef
Hybrid/Tech
7
04-07-2008 08:11 PM
jockobo
Forced Induction
9
03-25-2003 08:57 PM