Re:turbo edit/ghettodyne for dummies
 

ahhh, more questions lately.

1. The horizontal column is associated with the pressure on the map sensor? and the vertical is the rpm column.

2. What exactly do the numbers at any given intersection stand for? Is this injector pulse widths or something?

-Stealthmode (Still learning) ;)

Re:turbo edit/ghettodyne for dummies
 

Re:turbo edit/ghettodyne for dummies
 

See, I am learning. I love this. 8)

I am working on the budget to get that ps9 to you. I haven't flaked. :P

Thanks for the help.

Re:turbo edit/ghettodyne for dummies
 

Since I will be using TE aswell when the time comes...

ok.. for an AFC.. if you run say -38 and its still to lean you go to -36 and so on. for TE what is an acceptable change? .2 ? what? some examples would be bitchin ;)

Re:turbo edit/ghettodyne for dummies
 

i got a hold of a smc dual i want to know if i can still use your boost retard and launch control

Re:turbo edit/ghettodyne for dummies
 

Normally, you increase/decrease by 3% of the initial value to get a noticable change.

Re:turbo edit/ghettodyne for dummies
 

is there a function that increases the entire map by 3 %?

like..

Enter Change: ____ % ?

Re:turbo edit/ghettodyne for dummies
 

Ya.. you use the Region Editing.

Highlight the part of the map you want to modify (in this case, the whole thing), right-click, then click Edit Region.

To increase by 3%, just type 3 in the percent box and press OK.

To decrease by 3%, just type -3 in the percent box, and press OK.

Same goes with the other options in the region edit.

Re:turbo edit/ghettodyne for dummies
 

kick ass! ;)

Re:turbo edit/ghettodyne for dummies
 

ok, so with the georgehack bin, since it retards 1deg/psi, in order to make it 0.5deg/psi i need to put -.5 as the value? TIA