4_door_teg

I've been researching for a while here and other places looking to see if it's possible to use turboEDIT on a b16 that is obd).
I currently have a pr3, do I need to switch to pm6? The turboedit website has it on the front page but doesnt have any info on how to do it. Can anyone give me some decent links or point me in the direction I need to go? Thanks

B16MIKE

i have a 90 teg w/b16 too.yes u need the pm6 to use turbo edit on ur car. I used the pm6 for a while but,with the pm6 it won't operate vtec.u have to use something else like a rpm switch.or find a ps9 ecu from a 90-91 civic ex automatic and it will run vtec only through turboedit.u need to be able to chip the ecu and have a eprom burner and eproms to make your turbo basemaps.

4_door_teg

Sweet thanks. Can I use a v-afc to use vtec with it changing anytihng I apply with turboEDIT? thanks again man.

Also what turbo do you run and how much psi?

Chris Harris

You can use the VAFC to control your VTEC and the ECU to control your maps. They are working on using VTEC with the PM6 ECU...you will however have to modify your ECU to act like the PS9 ecu.

check out:
http://forum.pgmfi.org/viewtopic.php?t=3378
http://forum.pgmfi.org/viewtopic.php?t=3292

...although I see you have also posted a thread there too.