TE NG25 Base Map for Turbo ZC
05-25-2004, 12:26 PM
#21
1.0 BAR
Join Date: Apr 2003
Posts: 288
Re:TE NG25 Base Map for Turbo ZC
Do you want to play dirty or not?
If you want to play clean, set the distributor to stock per spec.
If you want to play dirty, retard the distributor as far as it will go. Make a note of how many degrees retarded from 16 degrees timing is.
Advance your ENTIRE PROGRAM by the amount that the dizzy is retarded, so that it is still reading 16 deg @ idle.
Now retard the **** out of the WOT area around where you set your launch control... can you say 1-2psi of boost off the line?
If you want to play clean, set the distributor to stock per spec.
If you want to play dirty, retard the distributor as far as it will go. Make a note of how many degrees retarded from 16 degrees timing is.
Advance your ENTIRE PROGRAM by the amount that the dizzy is retarded, so that it is still reading 16 deg @ idle.
Now retard the **** out of the WOT area around where you set your launch control... can you say 1-2psi of boost off the line?
Thread
Thread Starter
Forum
Replies
Last Post
