TE copy paste glitch
#1
TE copy paste glitch
here are the pics
The top is the pic of me using the base map helper to create the stock pr3 fuel map adjusted to the colums of the ng28 rom. The bottom is the pasted map from the excel file For some reason it seems that copys all wrong. Also, it seems that TE wont let me adjust any values above 10.85. the values seem to past into anyother stock rom easily. How do I fix this
The top is the pic of me using the base map helper to create the stock pr3 fuel map adjusted to the colums of the ng28 rom. The bottom is the pasted map from the excel file For some reason it seems that copys all wrong. Also, it seems that TE wont let me adjust any values above 10.85. the values seem to past into anyother stock rom easily. How do I fix this
#4
Re:TE copy paste glitch
you are also using the RORY bin file.
try the NG48
and if you can, write me out a step by step of everything you did so i can try and replicate it
email it to me AT xenocron@turboedit.org
try the NG48
and if you can, write me out a step by step of everything you did so i can try and replicate it
email it to me AT xenocron@turboedit.org
#5
Re:TE copy paste glitch
Given the fuel multipliers in my bin, this makes sense. For example, the last four columns:
- a = 2 ^ Column Multiplier
- pulsewidth in ms = (Dec At Addy + (224/a))/(208/a)
The column multiplier in those last columns is 3. Since you can't have a "Dec At Addy" higher than 255, the highest pulsewidth you'll see is 10.88.
My bin is using ng48 as its base. I think you just need to change the fuel multipliers.
-Rory
- a = 2 ^ Column Multiplier
- pulsewidth in ms = (Dec At Addy + (224/a))/(208/a)
The column multiplier in those last columns is 3. Since you can't have a "Dec At Addy" higher than 255, the highest pulsewidth you'll see is 10.88.
My bin is using ng48 as its base. I think you just need to change the fuel multipliers.
-Rory
Thread
Thread Starter
Forum
Replies
Last Post
Special ED
General Discussion
13
03-18-2005 06:31 PM