TE copy paste glitch
 

here are the pics
http://home.comcast.net/~sleepercivi...emaphelper.JPG

http://home.comcast.net/~sleepercivic88/TE.JPG

The top is the pic of me using the base map helper to create the stock pr3 fuel map adjusted to the colums of the ng28 rom. The bottom is the pasted map from the excel file For some reason it seems that copys all wrong. Also, it seems that TE wont let me adjust any values above 10.85. the values seem to past into anyother stock rom easily. How do I fix this

Re:TE copy paste glitch
 

Weird...Im guessing you dont have your fuel multipliers set to auto detect.

What version of TE are you using?

Re:TE copy paste glitch
 

Im using version try 11 with auto detect.

Re:TE copy paste glitch
 

you are also using the RORY bin file.

try the NG48

and if you can, write me out a step by step of everything you did so i can try and replicate it

email it to me AT xenocron@turboedit.org

Re:TE copy paste glitch
 

Given the fuel multipliers in my bin, this makes sense. For example, the last four columns:

- a = 2 ^ Column Multiplier
- pulsewidth in ms = (Dec At Addy + (224/a))/(208/a)

The column multiplier in those last columns is 3. Since you can't have a "Dec At Addy" higher than 255, the highest pulsewidth you'll see is 10.88.

My bin is using ng48 as its base. I think you just need to change the fuel multipliers.

-Rory

Re:TE copy paste glitch
 

Ok, that makes scence im 88b16civic brother. I have no previous experiance with adjusting the multiplyers so how should I fix it without creating havoc.

Re:TE copy paste glitch
 

Based on the numbers in your fuel map, I'm assuming you're running 240cc injectors? If so, the stock multipliers are 0 1 1 2 2 3 3 3 3 3 3 3 4 4 4. Those would probably be safe to use.

Re:TE copy paste glitch
 

Now that u mention it im going to adjust the map later for 450s so mabey the problem is fixed. Thanks for all your help. Im intrested in learning asm so i hopfuly will be able to help out with the cause.