Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

+STILL NO GO+ help me with moates burn1

Old 06-18-2004, 11:57 AM
  #1  
1.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 404
Default +STILL NO GO+ help me with moates burn1

Finally got the car ready, and cant get the damn burner to work. Im running xp, and it just will not work. I open flash burn and it does nothing at all with the burner.

thanks
pat

AIM me at phatrick2332
steelcityhonda is offline  
Old 06-18-2004, 12:09 PM
  #2  
1.5 BAR
 
Join Date: Jun 2003
Posts: 911
Default Re:help me with moates burn1

Did you install the drivers and ----?
Carnesd is offline  
Old 06-18-2004, 12:16 PM
  #3  
1.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 404
Default Re:help me with moates burn1

im trying to, but its not ------- working, i Dl'd the Moates USB driver, and flash burn. The moates usb driver is supposed to show up under ports in the device manager, but it will not do it.
steelcityhonda is offline  
Old 06-18-2004, 12:46 PM
  #4  
1.5 BAR
 
Join Date: Jun 2003
Posts: 911
Default Re:help me with moates burn1

when you plug in the burner do you get a message that says "new hardware found"?
Carnesd is offline  
Old 06-18-2004, 01:02 PM
  #5  
1.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 404
Default Re:help me with moates burn1

nope
steelcityhonda is offline  
Old 06-18-2004, 01:16 PM
  #6  
1.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 404
Default Re:help me with moates burn1

ok, got the usp to acknowledge the burner and it says moates in the usp drivers list.blah blah..now when i try to do anything in flash N burn i get this.

Reading Device into buffer...
ERROR: Chip memory range must be divisible by 64
Reading Device into buffer...
ERROR: Chip memory range must be divisible by 64
Erasing Device...
ERROR: Erase Command returned failure.

thanks
pat
steelcityhonda is offline  
Old 06-18-2004, 04:05 PM
  #7  
0.0 BAR
 
Join Date: Mar 2004
Posts: 0
Default Re:+STILL NO GO+ help me with moates burn1

Ok mine installed easily. You download and unzip drivers. Then you hook up the burner to the USB. It will open new hardware wizard. It will ask to install driver and you want to do it manually. Then you point it to the file you unzipped the driver to. It should do the rest by itself. Make sure you are putting the chip in correctly into the burner. Bottom to the top with the ones on top empty. Top being cable end. Notch on chip goes up towards cable.
SpankedYA! is offline  
Old 06-18-2004, 05:23 PM
  #8  
1.0 BAR
Thread Starter
 
Join Date: Jan 2004
Posts: 404
Default Re:+STILL NO GO+ help me with moates burn1

lets start from basics then. cuz it woulnt work. Either becuz im ------- dumb, or somethings wrong, im going with choice 1.

ok. in the device list under ports it says.

Communications Port (COM1)
ECP Printer Port (LPT1)
Moates.net USB Device Driver (COM4)

All my files were saved to drive C: and then extracted to a folder that is in drive C: as well. Flash and burn 1.0 is also saved in drive C: (dont think any of that matters though)

what the hells going on?
steelcityhonda is offline  
Old 06-18-2004, 07:10 PM
  #9  
1.0 BAR
 
Join Date: Jul 2003
Posts: 629
Default Re:+STILL NO GO+ help me with moates burn1

When you open the flash burn and have the burner pluged in does it say...found autoprom usb version:05.02.A? make sure your chip matches the supported chips. if it says read only the you cant burn it.if you can click on load file to buffer. it should show the desktop.find what ever file you have to burn into the chip and double click it.then in the window at the bottom of flash burn it says file loaded:c\\windows\desktop\.........bin.then hit program chip.it should take it.if not there is something wrong with your file if you modified on of the stck maps from T.E.download the ng26 bin and burn it for practice.
B16MIKE is offline  
Old 06-18-2004, 07:37 PM
  #10  
1.0 BAR
 
Join Date: Jul 2003
Posts: 238
Default Re:+STILL NO GO+ help me with moates burn1

ijust had the same problem with mine and you wont belive it but it was a real easy fix you knnow where the bar that says supported chips are in the top left? click on what you chip you are using pro at29c256 and look at hex code on the right and thats it cause before you can do anything to a chip you have to click and pick what chip you are using hope that helps
snatch10psi is offline  

Thread Tools
Search this Thread
Quick Reply: +STILL NO GO+ help me with moates burn1


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.