SST chips no good or is it just me
I've been trying to use the SST 27SF512 chips from Xenocron and three out of three are giving me errors... are these simply bad chips or what? ::) I'm using willem btw.
Am now on the lookout for some AT29C256 chips... |
Re: SST chips no good or is it just me
Is your offset set correctly?
|
Re: SST chips no good or is it just me
yeah you' re just doing it wrong.
|
Re: SST chips no good or is it just me
Originally Posted by FooK
yeah you' re just doing it wrong.
now even with the new chips it doesnt matter what changes i make to any map, idle is uber rich, and above about 3000 its lean as hell |
Re: SST chips no good or is it just me
Originally Posted by Anubis_4_99
i had two bad chips from xenocron not long ago as well, bought two from moates and problem solved... maybe he has a bad batch or there getting damaged during shipping somehow
now even with the new chips it doesnt matter what changes i make to any map, idle is uber rich, and above about 3000 its lean as hell |
Re: SST chips no good or is it just me
Originally Posted by JK_Motorsports
Is your offset set correctly?
I was able to program one, but after a couple of times it crapped out. I'm thinking the AT29c256 are more solid/reliable |
Re: SST chips no good or is it just me
Originally Posted by robus
yes, 8000
I was able to program one, but after a couple of times it crapped out. I'm thinking the AT29c256 are more solid/reliable personally ive burned and re-burned more SST chips than i can count, without ever having a problem. I don't for one second doubt their capability or reliability oh, and im also burning with a willem. |
Re: SST chips no good or is it just me
my barrowed willems doesnt like sst's at all, i use 29's and its fiine
|
Re: SST chips no good or is it just me
I use both on a regular basis without problem. the offset should be 080000. But you had burned one in the past, so that probably isn't it.
|
Re: SST chips no good or is it just me
are you changing the yellow jumper and erasing them properly before each burn? and watching the erase process to make sure the progress bar doesnt start over at all?
|
Re: SST chips no good or is it just me
Cray I think you put an extra 0 in there.
I've been burning them with my Willem for a while now, and have only encountered one bad chip. Make sure you set the jumper for erase and erase the chip every time before you burn it. Don't forget to set the jumper back to burn before burning. |
Re: SST chips no good or is it just me
I use SST 27SF512's exclusively with my willems. in fact i lost all of mine but one so this one has been reburnt a ---- ton
How I get them to burn right every time Move erase jumper to erase and go into the software and erase Make sure offset is set to 8000 and clear the cache, and make sure jumper is set to normal. Remove the jumper that is above the zif socket, and press the button to the right of it until the led on the far right is lit up load your bin and hit the burn button. i think at this point a dialog box comes up.. hit ok. then put the jumper back in and it should burn |
Re: SST chips no good or is it just me
Moates Burn1 FTW!!!
|
Re: SST chips no good or is it just me
Originally Posted by CSaddict
Moates Burn1 FTW!!!
|
Re: SST chips no good or is it just me
LOL For $40 more its worth not having to ---- with jumpers and that ----.
|
Re: SST chips no good or is it just me
Originally Posted by CSaddict
LOL For $40 more its worth not having to ---- with jumpers and that ----.
|
Re: SST chips no good or is it just me
Originally Posted by CSaddict
LOL For $40 more its worth not having to ---- with jumpers and that ----.
Originally Posted by Minor Threat
Agreed, I have both, and I only bought the Burn1 because I got frustrated using the Willem. I've kept it around simply because it burns 27c256s.
|
Re: SST chips no good or is it just me
I do a lot of GM stuff with my Burn 1. I back read lots of GM ---- so changing the chip designation and offset is a constant thing.
|
Re: SST chips no good or is it just me
Originally Posted by FooK
I move one jumper one spot over to switch from burn to erase...doesn't seem like that much of a hassle to me. I only have to burn the chip once for each car I tune. In 3 years it hasnt become a hassle at all, and paid for itself time and time again. Maybe the Burn1 is easier to use or whatever, but I have seen no indications of a Willem being a hassle or frustrating, so I can't really see a reason to switch. The damn thing is so easy to use a retarded monkey could do it. Alll these dipshits have problems cause they don't read the setup stuff that comes on the CD.
I don't have a romulator, and I needed something I could plug into the laptop easily. |
Re: SST chips no good or is it just me
I have the willems also, it is easy once you understand how to use it. Someone ganked a 29c256 right out of my car! is there any place you know of that still sells them?
|
Re: SST chips no good or is it just me
Originally Posted by ifly87
I have the willems also, it is easy once you understand how to use it. Someone ganked a 29c256 right out of my car! is there any place you know of that still sells them?
Works fine as a drop-in replacement for the AT29C256. qouted from moates.net about the 27SF512 chips, few bucks a pop... if thats the chip your refering to |
Re: SST chips no good or is it just me
simple moates sells it it works
I ahve used them no probs |
Re: SST chips no good or is it just me
Originally Posted by CSaddict
I do a lot of GM stuff with my Burn 1. I back read lots of GM ---- so changing the chip designation and offset is a constant thing.
|
Re: SST chips no good or is it just me
never had an problem with sst 29c512 and my willem
|
Re: SST chips no good or is it just me
ive just started using em 27SF512 chips am im a complete noob when it comes to this sorta stuff.
so basically, i cant figure out how to erase it. eg which jumpers to change. can anyone show me which jumpers to change to erase it. cheers!!. |
Re: SST chips no good or is it just me
^ BAN
u would copy me. |
Re: SST chips no good or is it just me
If you're using a Willem, a pop up "pops up" and tells you which jumpers to change.
|
Re: SST chips no good or is it just me
Originally Posted by SmellySOHC
^ BAN
u would copy me. |
Re: SST chips no good or is it just me
with my willem enhanced after i initially removed the safety jumper, i never had to ---- with it again. just the buttons. burned SST's over and over w/no problem.
user error |
Re: SST chips no good or is it just me
Originally Posted by -SphiNx-
fuk off. :6
|
Re: SST chips no good or is it just me
What the ----?
|
Re: SST chips no good or is it just me
Originally Posted by SmellySOHC
ur a big man behind the monitor. fag.
|
Re: SST chips no good or is it just me
Originally Posted by -SphiNx-
if only you knew fukface.
|
Re: SST chips no good or is it just me
just burned a bunch today all bueno
|
Re: SST chips no good or is it just me
if you are using a WILLEM
http://www.-------------/install/Willem-SST.htm if you are using a BURN1, just skip the second step http://www.-------------/install/2Timer.htm
Originally Posted by -SphiNx-
ive just started using em 27SF512 chips am im a complete noob when it comes to this sorta stuff.
so basically, i cant figure out how to erase it. eg which jumpers to change. can anyone show me which jumpers to change to erase it. cheers!!. |
Re: SST chips no good or is it just me
Make sure your computer doesn't have something else like an extra printer or something installed to the port your using for the burner.
|
Re: SST chips no good or is it just me
Originally Posted by xenocron
if you are using a WILLEM
http://www.-------------/install/Willem-SST.htm if you are using a BURN1, just skip the second step http://www.-------------/install/2Timer.htm |
Re: SST chips no good or is it just me
My Willem board is a little different, but here is what works for me...
http://www.turbols.net/TechInfo/27SF512.html There may be a simpler way, but this is what I've had a lot of success with. |
Re: SST chips no good or is it just me
Good link...didnt read it all over...but pictures of programmers turn me on.
|
Re: SST chips no good or is it just me
To anyone who is reading this the chips work I ahve never had one not work. Buy them up. Its user error if no workie
|
All times are GMT -5. The time now is 09:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands