Solid cel, won't rev past 3k, WTF, please help
#1
Solid cel, won't rev past 3k, WTF, please help
I have a socketed PM6, running 450cc, w/ turboedit. My friend made me a basemap, so I use my Motes Burn1 to burn the chip. The first time i put the chip in and start it, it actually idles pretty good. But the ECU light just stayed lit up. I gave it some gas and it would rev to about 3k (where boost starts) and the car stubbles or sounds like its on a slow rev limit. I dont know what is going on, please help. The socketed ecu just came fresh out of another running car with no problems. Im so fustrated
#2
Re: Solid cel, won't rev past 3k, WTF, please help
Originally Posted by The Milk Man
I have a socketed PM6, running 450cc, w/ turboedit. My friend made me a basemap, so I use my Motes Burn1 to burn the chip. The first time i put the chip in and start it, it actually idles pretty good. But the ECU light just stayed lit up. I gave it some gas and it would rev to about 3k (where boost starts) and the car stubbles or sounds like its on a slow rev limit. I dont know what is going on, please help. The socketed ecu just came fresh out of another running car with no problems. Im so fustrated
Did you jump it and see if any codes come up?
#3
Re: Solid cel, won't rev past 3k, WTF, please help
Originally Posted by The Milk Man
I have a socketed PM6, running 450cc, w/ turboedit. My friend made me a basemap, so I use my Motes Burn1 to burn the chip. The first time i put the chip in and start it, it actually idles pretty good. But the ECU light just stayed lit up. I gave it some gas and it would rev to about 3k (where boost starts) and the car stubbles or sounds like its on a slow rev limit. I dont know what is going on, please help. The socketed ecu just came fresh out of another running car with no problems. Im so fustrated
#4
Re: Solid cel, won't rev past 3k, WTF, please help
Originally Posted by MADMAX
Did you jump it and see if any codes come up?
#5
Re: Solid cel, won't rev past 3k, WTF, please help
Originally Posted by CSaddict
Jump what? Its OBD0 Its either a bad burn on the chip, chip inserted wrong, or a bad soldering job on the ecu.
And because that, the ECU its in Limp Mode!
#6
Re: Solid cel, won't rev past 3k, WTF, please help
Originally Posted by CSaddict
Jump what? Its OBD0 Its either a bad burn on the chip, chip inserted wrong, or a bad soldering job on the ecu.
Wow, I musta high when I posted that. PM6, doh.
#8
Re: Solid cel, won't rev past 3k, WTF, please help
Originally Posted by CSaddict
Jump what? Its OBD0 Its either a bad burn on the chip, chip inserted wrong, or a bad soldering job on the ecu.
even if it was obd1 and you could jump the service connector, a "solid" cel doesn't show any codes.......it's solid......
Thread
Thread Starter
Forum
Replies
Last Post