So...I've changed my views on stock injectors and FMUs
#11
Re: So...I've changed my views on stock injectors and FMUs
I've been curoius about this. The stock PM6 fuel maps are at 77% duty cycle at 1.3psi/6300rpms. What's your a/f ratio at 85% duty cycle? IMO I rather get a new set of injectors instead of used DSM's, so your looking at like $200.
#12
Re: So...I've changed my views on stock injectors and FMUs
I think its funny you are getting all butt hurt in this thread...I was just playing nukka.
Anyways...yes DSM 450s are cheap but still people are using FMU's and AFC's and now that I had first hand experience with this, I wanted to share my results.
I'm happy you think you did it first as well...again, not the point of this thread. Jeez, chill out
my car's built and has been running, wanna compare time slips and dyno charts? and if you want to get technical, i ran 5 psi for a few weeks with no fuel management at all back in the day and it held find, i've tuned quite a few cars on stock injectors with chipped ecu up to about 5-6 psi, it's not really a big discovery, just kind of pointless when dsm 450's are only 50-70 bucks and you already have a chipped ecu if you.
Anyways...yes DSM 450s are cheap but still people are using FMU's and AFC's and now that I had first hand experience with this, I wanted to share my results.
I'm happy you think you did it first as well...again, not the point of this thread. Jeez, chill out
Originally Posted by projekteg
Originally Posted by xenocron
No need to get pissy because you keep blowing your car up and it never runs... :P
#13
Re: So...I've changed my views on stock injectors and FMUs
Originally Posted by xenocron
I think its funny you are getting all butt hurt in this thread...I was just playing nukka.
Anyways...yes DSM 450s are cheap but still people are using FMU's and AFC's and now that I had first hand experience with this, I wanted to share my results.
I'm happy you think you did it first as well...again, not the point of this thread. Jeez, chill out
Anyways...yes DSM 450s are cheap but still people are using FMU's and AFC's and now that I had first hand experience with this, I wanted to share my results.
I'm happy you think you did it first as well...again, not the point of this thread. Jeez, chill out
#14
Re: So...I've changed my views on stock injectors and FMUs
Originally Posted by projekteg
i was just saying of course it works, why wouldn't it? i lub you chrissy p00.
I <3 U2
Thread
Thread Starter
Forum
Replies
Last Post