Go Back  HomemadeTurbo - DIY Turbo Forum > Homemadeturbo > Engine Management
Delay after depressing throttle.....possible causes? (uber w/pr4) >

Delay after depressing throttle.....possible causes? (uber w/pr4)

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Delay after depressing throttle.....possible causes? (uber w/pr4)

Old 10-04-2005, 05:14 PM
  #1  
1.0 BAR
Thread Starter
 
Join Date: Aug 2003
Posts: 489
Default Delay after depressing throttle.....possible causes? (uber w/pr4)

What would be the most likely cause of a large delay after pressing the throttle? At first I thought it to be a timing issue but it seems that may not be the case. I recently swapped engines and went from an underhood intercooler to front mount. The engines were both b20a's (3rd gen prelude)
I'm running uberdata with a chipped pr4. The same map that worked on the other engine doesn't seem to be working on this one. If I slowly depress the throttle the engine responds ok but anything moderately quick makes it want to bog way down before the rpm's rise. Sometimes it nearly stalls.
Any ideas?
Heath is offline  
Old 10-04-2005, 07:24 PM
  #2  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: Delay after depressing throttle.....possible causes? (uber w/pr4)

Sounds like your TPS 'Tip-In' is going lean...common problem I remember I used to see with Uberdata.

There might be a fix...

www.uberdata.info
Chris Harris is offline  
Old 10-05-2005, 11:13 AM
  #3  
1.0 BAR
Thread Starter
 
Join Date: Aug 2003
Posts: 489
Default Re: Delay after depressing throttle.....possible causes? (uber w/pr4)

Thanks for the advice. I enrichened the tps tip-in and the majority of the hesitation is gone!
You saved me a lot of hassle. Thanks Xenocron
Heath is offline  
Old 10-05-2005, 11:36 AM
  #4  
0.0 BAR
 
Join Date: Feb 2003
Posts: 0
Default Re: Delay after depressing throttle.....possible causes? (uber w/pr4)

Problem is Uberdata cuts fuel at TPS values less than 15, stock TPS closed position is 9 or sometimes 10. I adjust TPS to 14, never worry about fuel cut value.
Tom-Guy is offline  
Old 10-05-2005, 01:14 PM
  #5  
1.0 BAR
 
Join Date: May 2005
Posts: 326
Default Re: Delay after depressing throttle.....possible causes? (uber w/pr4)

yeah sometimes in uber i feel hesistation on deceleration, and my tps or throttle sticks at like 10%?wtf
bennyhonda7 is offline  
Old 10-06-2005, 12:22 AM
  #6  
0.0 BAR
 
Join Date: Feb 2003
Posts: 0
Default Re: Delay after depressing throttle.....possible causes? (uber w/pr4)

It's not %. It's arbitrary junk number. "10" is about right for stock unadjusted TPS when closed.
Tom-Guy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stillnoturbo
General Discussion
15
04-30-2006 03:29 PM
nonvtec
Engine Management
6
02-16-2004 08:00 PM
racinskittle
Forced Induction
21
10-03-2003 07:32 AM
civicunrest
General Discussion
7
09-08-2003 03:38 AM


Thread Tools
Search this Thread
Quick Reply: Delay after depressing throttle.....possible causes? (uber w/pr4)


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.