SAFC and 390's got no codes no more!!!!hooray!!!
#1
SAFC and 390's got no codes no more!!!!hooray!!!
So i get a CEL and i want to know what the problem is!
i get these codes....
1 -oxygen content
3 -Manifold Absolute Pressure ( map sensor?)
6 -coolant temp
9 -No.1 cylender position (1.6) TDC
13-atmospheric pressure
I hooked up the AFC ( **** afc ) and the 390's and im getting these codes what gives
Anyone ran into this problem>? what should i check?
i get these codes....
1 -oxygen content
3 -Manifold Absolute Pressure ( map sensor?)
6 -coolant temp
9 -No.1 cylender position (1.6) TDC
13-atmospheric pressure
I hooked up the AFC ( **** afc ) and the 390's and im getting these codes what gives
Anyone ran into this problem>? what should i check?
#2
Re:SAFC and 390's got codes 6,9,10,13,3 WTF???
lol, well obviously you need to check ALL of your wiring because running the afc isnt just going to randomly pop all those codes unless you did something wrong.
Heres a quick question, are these hard faults? If so have you cleared the codes and rechecked which ones were?
5 codes just doesnt just happen for no reason, and it's not something we are going to be able to tell you what to fix because we cannot see it. Whatever you did last I'd double check, tripple check.
Jeff
Heres a quick question, are these hard faults? If so have you cleared the codes and rechecked which ones were?
5 codes just doesnt just happen for no reason, and it's not something we are going to be able to tell you what to fix because we cannot see it. Whatever you did last I'd double check, tripple check.
Jeff
#3
Re:SAFC and 390's got codes 6,9,10,13,3 WTF???
lol, yeah you hooked something up wrong.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#4
Re:SAFC and 390's got codes 6,9,10,13,3 WTF???
maybe the AFC is hooked up wrong? thats the only thing i can think of! im thinking the 2 wires that you cut off and run through the AFC are backwards...
ill try that later today...thanks doc and jeff....
ill try that later today...thanks doc and jeff....
#6
Re:SAFC and 390's got codes 6,9,10,13,3 WTF???
Originally Posted by whiterice
hey puto,
clear the codes and try again.
if it's the same, disconnect the afc plug. clear the codes and try again.
i don't think i can help out today, maybe tomorrow.
clear the codes and try again.
if it's the same, disconnect the afc plug. clear the codes and try again.
i don't think i can help out today, maybe tomorrow.
oh and congrats on that $100 find ...when you wnana sstart tearing the teg down?
Thread
Thread Starter
Forum
Replies
Last Post