Running way too rich
09-30-2007, 09:52 PM
#1
0.0 BAR
Thread Starter
Join Date: Sep 2007
Posts: 11
Running way too rich
Hey guys I just got my setup done it is a 92 si with a chipped p28 14b 450cc, I loaded a basemap from Xenocron's website and when I turned on the car it sounded like a V8 and would barely run. It eventually stalled after a couple minutes and the spark plugs were saturated in gas. I dont have a wideband and was wondering if anyone has insight as to how I can get my car to at least idle.
This is what the basemap was called at www.-------------/bins
450cc-14b-crome-p28-19deg-v3dl
This is what the basemap was called at www.-------------/bins
450cc-14b-crome-p28-19deg-v3dl
10-01-2007, 10:35 PM
#3
0.0 BAR
Thread Starter
Join Date: Sep 2007
Posts: 11
Re: Running way too rich
correct me if I am wrong but i always thought that in the fuel map for crome you were supposed to have more fuel for the high cam and less for the low cam. Can someone look at the basemap that i posted and see if everything looks ok
10-02-2007, 03:51 PM
#5
3.0 BAR
Join Date: Oct 2003
Location: Your mom's panties
Posts: 3,696
Re: Running way too rich
Are you serious? I'm running that same basemap and I have no problems. At idle I'm about 14:1afr which isn't terrible. In boost I'm sub 11:1 all the time. Runs fine, kinda has a rough idle but it runs at 14:1. 10lbs all day "nigg." With that basemap you shouldn't be running that shitty rich.
Thread
Thread Starter
Forum
Replies
Last Post
sohcpwr
Engine Management
9
08-30-2007 12:20 PM
pa2play
Engine Management
20
06-28-2004 04:24 PM
