HomemadeTurbo - DIY Turbo Forum - Prolly going TE! help me out..

Page 2 of 3

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - Prolly going TE! help me out.. (https://www.homemadeturbo.com/engine-management-10/prolly-going-te-help-me-out-34362/)

draztik

02-01-2005 04:06 PM

Re:Prolly going TE! help me out..

i plan on blowing this engine and saving up for a B-series, so 450cc injectors are not needed...

i Have the TE program 2.1 i think and it wont' allow me to do 390cc injectors, why?

SpankedYA!

02-01-2005 04:08 PM

Re:Prolly going TE! help me out..

You select what is available and scale it manually in the map. ::)

draztik

02-01-2005 04:09 PM

Re:Prolly going TE! help me out..

alright....

Chris Harris

02-01-2005 04:11 PM

Re:Prolly going TE! help me out..

Quote:

Originally Posted by DraZtiK

if someone can make me a base map for my set up i would appreciate it!! let me know and i'll tell you my set up and just send it to my email!!! BTW i'm running DSM 390cc injectors! can TE do that? i can't get it to work with anything smaller than 410cc or whatever..

If you are sending out your ECU to get it chipped...I'm your man. If you do send it to me it comes back to you with a basemap already on the chip.

I like the Batronix and Willem burners for the money. The Moates is a handy burner but it only accepts 3 types of chips...one of which is discontinued now and the other two most people dont know how to use correctly (from what I have seen)

As far as why you cant scale for 390s, TurboEdit doesnt let you go backwards when rescaling injectors.

http://www.-------------/te

Read my write-ups about TE and they should help you if you havent already :D

draztik

02-01-2005 04:26 PM

Re:Prolly going TE! help me out..

wheres the Export and Import options????

Chris Harris

02-01-2005 05:05 PM

Re:Prolly going TE! help me out..

Quote:

Originally Posted by DraZtiK

wheres the Export and Import options????

I never use them...

draztik

02-01-2005 05:05 PM

Re:Prolly going TE! help me out..

Hey xenocron! can you check out my basemap and see if i did it right??

EDIT: sent you an email! should be from draztikracing@yahoo.com

Chris Harris

02-01-2005 05:08 PM

Re:Prolly going TE! help me out..

I wont be able to tell if you did it right or not.

Put it in the car and see how it runs!!

draztik

02-01-2005 05:10 PM

Re:Prolly going TE! help me out..

no i mean just on TE run through it and see if the #'s look right to you.. also i don't have a burner yet, i just wanted to see if i can figure this all out!

draztik

02-01-2005 05:13 PM

Re:Prolly going TE! help me out..

also can someone pull the link to the ecu chipping kit where i can just swap in and out chips?! i'll probably get the willem burner!

also from the willem page http://www.willem.org/epromshop.html

which burner should i get??

EDIT: just got this:

http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWN:IT

copying teg...

now wheres those chips?? are they one ebay too? are they 28 pin?

All times are GMT -5. The time now is 05:26 PM.

Page 2 of 3

Show 40 post(s) from this thread on one page