Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

problems with dsm 450's and chrome basemap

Thread Tools
 
Search this Thread
 
Old Jul 7, 2006 | 10:48 PM
  #1  
allmotoreh2's Avatar
Thread Starter
0.5 BAR
 
Joined: Jun 2006
Posts: 91
Default problems with dsm 450's and chrome basemap

I got a basemap burnt last weekend from intec, just to get the car to a tuner to get tuned, the car is running like ---- and smells rich as ----, you try to give it gas and it sounds like its missing or somethin...the timing is good, brand new dizzy, wires are fairly new, and im about to go gap the plugs to .030 I have no clue what is going on, can anyone help? one thing is I have a obd-1 ls harness on a sohc vtec so the blue wire on the dizzy (negative coil) is not hooked up to anything, could this be a problem? or could it be a very rich basemap? ------- intec...
Old Jul 8, 2006 | 01:33 AM
  #2  
StinkyFeet's Avatar
1.0 BAR
 
Joined: May 2006
Posts: 295
Default Re: problems with dsm 450's and chrome basemap

i also have similiar setup... no probs.

Are you throwing a cel? (check engine light?

Did you install resistors, or resistor box for Injectors?
Old Jul 8, 2006 | 11:01 AM
  #3  
allmotoreh2's Avatar
Thread Starter
0.5 BAR
 
Joined: Jun 2006
Posts: 91
Default Re: problems with dsm 450's and chrome basemap

yep, I put a resistor box in,and it is wired correctly, now the problem is it sounds like its running on 2 cylinders and whlile its idling I can take the injector plug off #2 and #3 and the car dosent Idle any different...I thought it was bad injectors but I swapped them around and it still does it on #2 and #3...what does this sound like to you guys? a bad ecu?
Old Jul 8, 2006 | 11:20 AM
  #4  
StinkyFeet's Avatar
1.0 BAR
 
Joined: May 2006
Posts: 295
Default Re: problems with dsm 450's and chrome basemap

u sure u installed that resistor box on the right wires (black wires on box to the yellow wires on each injector)
Old Jul 8, 2006 | 12:58 PM
  #5  
StanB's Avatar
1.5 BAR
 
Joined: Sep 2003
Posts: 842
Default Re: problems with dsm 450's and chrome basemap

Originally Posted by allmotoreh2
yep, I put a resistor box in,and it is wired correctly, now the problem is it sounds like its running on 2 cylinders and whlile its idling I can take the injector plug off #2 and #3 and the car dosent Idle any different...I thought it was bad injectors but I swapped them around and it still does it on #2 and #3...what does this sound like to you guys? a bad ecu?

Try different plug wires on cylinders 2 and 3, then try different plugs.
Old Jul 9, 2006 | 11:34 AM
  #6  
allmotoreh2's Avatar
Thread Starter
0.5 BAR
 
Joined: Jun 2006
Posts: 91
Default Re: problems with dsm 450's and chrome basemap

I wired the resistor box right, Ive tried different wires, havent tried different plugs yet though, ill try that today,
Old Jul 9, 2006 | 02:22 PM
  #7  
allmotoreh2's Avatar
Thread Starter
0.5 BAR
 
Joined: Jun 2006
Posts: 91
Default Re: problems with dsm 450's and chrome basemap

got it fixed, I dont even want to talk about what it was, haha...now I just need tuning!
Old Jul 9, 2006 | 06:36 PM
  #9  
deckplate18's Avatar
0.0 BAR
 
Joined: Jun 2006
Posts: 25
Default Re: problems with dsm 450's and chrome basemap

firing order haha
Old Jul 9, 2006 | 07:51 PM
  #10  
Oscar's Avatar
0.0 BAR
 
Joined: Jun 2005
Posts: 0
From: WA
Default Re: problems with dsm 450's and chrome basemap

bwahahaha.



All times are GMT -5. The time now is 01:35 PM.