HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   problems with dsm 450's and chrome basemap (https://www.homemadeturbo.com/engine-management-10/problems-dsm-450s-chrome-basemap-64443/)

allmotoreh2 07-07-2006 10:48 PM

problems with dsm 450's and chrome basemap
 
I got a basemap burnt last weekend from intec, just to get the car to a tuner to get tuned, the car is running like ---- and smells rich as ----, you try to give it gas and it sounds like its missing or somethin...the timing is good, brand new dizzy, wires are fairly new, and im about to go gap the plugs to .030 I have no clue what is going on, can anyone help? one thing is I have a obd-1 ls harness on a sohc vtec so the blue wire on the dizzy (negative coil) is not hooked up to anything, could this be a problem? or could it be a very rich basemap? ------- intec...

StinkyFeet 07-08-2006 01:33 AM

Re: problems with dsm 450's and chrome basemap
 
i also have similiar setup... no probs.

Are you throwing a cel? (check engine light?

Did you install resistors, or resistor box for Injectors?

allmotoreh2 07-08-2006 11:01 AM

Re: problems with dsm 450's and chrome basemap
 
yep, I put a resistor box in,and it is wired correctly, now the problem is it sounds like its running on 2 cylinders and whlile its idling I can take the injector plug off #2 and #3 and the car dosent Idle any different...I thought it was bad injectors but I swapped them around and it still does it on #2 and #3...what does this sound like to you guys? a bad ecu?

StinkyFeet 07-08-2006 11:20 AM

Re: problems with dsm 450's and chrome basemap
 
u sure u installed that resistor box on the right wires??? (black wires on box to the yellow wires on each injector)

StanB 07-08-2006 12:58 PM

Re: problems with dsm 450's and chrome basemap
 

Originally Posted by allmotoreh2
yep, I put a resistor box in,and it is wired correctly, now the problem is it sounds like its running on 2 cylinders and whlile its idling I can take the injector plug off #2 and #3 and the car dosent Idle any different...I thought it was bad injectors but I swapped them around and it still does it on #2 and #3...what does this sound like to you guys? a bad ecu?


Try different plug wires on cylinders 2 and 3, then try different plugs.

allmotoreh2 07-09-2006 11:34 AM

Re: problems with dsm 450's and chrome basemap
 
I wired the resistor box right, Ive tried different wires, havent tried different plugs yet though, ill try that today,

allmotoreh2 07-09-2006 02:22 PM

Re: problems with dsm 450's and chrome basemap
 
got it fixed, I dont even want to talk about what it was, haha...now I just need tuning! :y

HMTguy 07-09-2006 02:48 PM

Re: problems with dsm 450's and chrome basemap
 

Originally Posted by allmotoreh2
got it fixed, I dont even want to talk about what it was, haha...now I just need tuning! :y

That's dumb. You should tell people what it was.

deckplate18 07-09-2006 06:36 PM

Re: problems with dsm 450's and chrome basemap
 
firing order haha

Oscar 07-09-2006 07:51 PM

Re: problems with dsm 450's and chrome basemap
 
bwahahaha.


All times are GMT -5. The time now is 03:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands