Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Problems burning a chip with Burn1

Old 04-27-2007, 03:03 AM
  #1  
1.0 BAR
Thread Starter
 
hard2obtain's Avatar
 
Join Date: Jan 2006
Posts: 526
Default Problems burning a chip with Burn1

Recently i bought my Burn1 chip burner and i already intall it. I have my ecu chipped and the car runs great with my actual bin.

I have another 27SF512 burned chip with a old basemap that didnt works (veeery rich map), so here's what i do:

1. I load my actual bin to the burner buffer
2. Save the bin into my UBERDATA folder
3. Take out my actual chip and put older chip
4. Do Erase chip - OK
5. Do blank check - OK
6. Load my actual bin into burner buffer
7. Burn my actual bin into the old chip - DONE

Now i put the old chip with my actual bin ( it supposed to works as normal), but the car acts like if i put the old bin

Here's the values used on flash&burn
start in 008000
end in 00FFFF
for a 27sf512
hard2obtain is offline  
Old 04-27-2007, 06:32 AM
  #2  
0.0 BAR
 
Join Date: Mar 2004
Posts: 0
Default Re: Problems burning a chip with Burn1

Any CEL? Do you have the chip in the right way? Did you put it in the burner right? Your process to burn it seems fine to me.
SpankedYA! is offline  
Old 04-27-2007, 11:43 PM
  #4  
1.0 BAR
Thread Starter
 
hard2obtain's Avatar
 
Join Date: Jan 2006
Posts: 526
Default Re: Problems burning a chip with Burn1

I'm using the Beerbongkickass bin on my chip and thats the same bin i try to burn
hard2obtain is offline  
Old 04-28-2007, 01:41 AM
  #6  
1.0 BAR
 
Join Date: Aug 2005
Posts: 209
Default Re: Problems burning a chip with Burn1

Hmm im having problems with mine also... i made some base maps for a h22 swapped prelude using a chipped P28 (he got off Ebay) i also have downloaded stock bins off PGMFI and if i burn any and put in the zif it idels at 2,000 and wont rev past 4,000rpms i personaly think mine isnt burning correctly and im using the same values... I hope you figure it out and it might help me out aswell...
Ef8sirjunkie is offline  
Old 04-28-2007, 06:26 PM
  #7  
1.0 BAR
Thread Starter
 
hard2obtain's Avatar
 
Join Date: Jan 2006
Posts: 526
Default Re: Problems burning a chip with Burn1

Originally Posted by Dmc1
Try another chip. Sometimes they go bad. Ive only ran into one bad chip but it does happen. Another thing you could check is your port settings. Burn1 has to be in port 3 or 4. It's something simple you just have to work through it. Try doing things in differant orders then you have been. You could also try and open the file in crome and burn it from there if your having problems with flash&burn.
Ok, i got another chip, but seems strange that i can delete and burn with the other chip, also burn1 are in port 3 or 4 but let me check what i can do
hard2obtain is offline  
Old 04-28-2007, 08:08 PM
  #8  
1.0 BAR
 
Join Date: Aug 2005
Posts: 209
Default Re: Problems burning a chip with Burn1

I think i found my problem i think my port was in 2 Hope you find the problem with yours...
Ef8sirjunkie is offline  
Old 05-01-2007, 08:16 PM
  #9  
1.5 BAR
 
Join Date: Jul 2005
Posts: 1,069
Default Re: Problems burning a chip with Burn1

Originally Posted by Ef8sirjunkie
Hmm im having problems with mine also... i made some base maps for a h22 swapped prelude using a chipped P28 (he got off Ebay) i also have downloaded stock bins off PGMFI and if i burn any and put in the zif it idels at 2,000 and wont rev past 4,000rpms i personaly think mine isnt burning correctly and im using the same values... I hope you figure it out and it might help me out aswell...
Your car was in limp mode, probably from your bad chip or bad chip job.
reactone is offline  
Old 05-02-2007, 12:38 AM
  #10  
1.0 BAR
 
Join Date: Aug 2005
Posts: 209
Default Re: Problems burning a chip with Burn1

Originally Posted by reactone
Your car was in limp mode, probably from your bad chip or bad chip job.
What, i didnt chip the ECU so it cant be my bad on the Chip job... i downloaded a stock P13Bin for a P28 and Burned it and put it in and it happend... tryed to connect the ostrich it worked but i couldnt get the datalogging cable to work so i couldnt live tune it... I just think its not burning correctly or the ecu he bought is junk...
Ef8sirjunkie is offline  

Thread Tools
Search this Thread
Quick Reply: Problems burning a chip with Burn1


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.