problem with xenocron chipped pm6?
12-07-2006, 08:10 PM
#1
0.5 BAR
Thread Starter
Join Date: Oct 2006
Posts: 141
problem with xenocron chipped pm6?
ok i ordered a chipped pm6 from xenocron that comes with 2 basemaps.
one basemap is for my 14b-setup and the other is for my current n/a set-up sorta of a reflash type program.
anyway i took out my stock pm6 and put in my chipped one and it wouldnt start for ----. so i leave it on the on setting and i go over the engine bay and i hear hsssing under the intake manifold so im like wtf?
i put my stock pm6 back in and it starts up fine no problem no hsssing
wtf is going on its either a bad chip or bad ecu any suggestions?
one basemap is for my 14b-setup and the other is for my current n/a set-up sorta of a reflash type program.
anyway i took out my stock pm6 and put in my chipped one and it wouldnt start for ----. so i leave it on the on setting and i go over the engine bay and i hear hsssing under the intake manifold so im like wtf?
i put my stock pm6 back in and it starts up fine no problem no hsssing
wtf is going on its either a bad chip or bad ecu any suggestions?
12-07-2006, 08:18 PM
#2
3.0 BAR
Join Date: Jul 2004
Posts: 2,255
Re: problem with xenocron chipped pm6?
Hissing as in fuel pump priming?
Go try again, disconnect your negative battery terminal, switch ecu's (make sure youre running the N/a map, the boosted one prob wont run), connect the battery and should be good to go
KNOWBODY has a problem with Chris' ecu's
Go try again, disconnect your negative battery terminal, switch ecu's (make sure youre running the N/a map, the boosted one prob wont run), connect the battery and should be good to go
KNOWBODY has a problem with Chris' ecu's
12-07-2006, 08:20 PM
#4
Guest
Posts: n/a
Re: problem with xenocron chipped pm6?
Well when I need help with a product That I bought from a company. I usaully will call the business and politely and patiently explane my problem and ask for troubleshooting advice. Then 99% of the time the company will help me fix the problem by correcting some thing you did wrong ""LIKE PUTTING THE EPROM IN BACKWARDS"" or they replace the defective part that I ordered from them.
I don't start a bitching thread on a public forum thry to slander someones business. Find something to make a rope with. If you don't know what to do next. Call a suicide hotline and ask them what the guy that called before you did.
I don't start a bitching thread on a public forum thry to slander someones business. Find something to make a rope with. If you don't know what to do next. Call a suicide hotline and ask them what the guy that called before you did.
12-07-2006, 08:45 PM
#6
0.5 BAR
Thread Starter
Join Date: Oct 2006
Posts: 141
Re: problem with xenocron chipped pm6?
im not trying to ---- up his business i already pm'd him already about this matter but i thought maybe can shine some light on this while im waiting. believe me i already tried it the way homeboy mentioned. the turbo basemap is in this baggie i got from them the n/a basemap is in the ecu. my stock pm6 doesnt cause any hsssing or start up issues. man i no how badass chris is im not trying to soil his name. so back off
12-07-2006, 09:03 PM
#9
3.0 BAR
Join Date: Jul 2003
Posts: 6,449
Re: problem with xenocron chipped pm6?
Every ECU is tested before it leaves out the door.
#1 are you getting any check engine lights?
if yes, what are they?
#2 yes bad chip burns can happen, but its not that common and this is specifically why i include TWO basemaps with every ECU where others include one or none.
Start with the easy stuff. I have replied to your PM.
http://www.-------------/install/Xenocron-ECUs.htm
#1 are you getting any check engine lights?
if yes, what are they?
#2 yes bad chip burns can happen, but its not that common and this is specifically why i include TWO basemaps with every ECU where others include one or none.
Start with the easy stuff. I have replied to your PM.
http://www.-------------/install/Xenocron-ECUs.htm
