Problem with Crome 1.2 Final (ps - they released 1.2 final, haha)
05-29-2006, 02:31 PM
#1
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Problem with Crome 1.2 Final (ps - they released 1.2 final, haha)
I had a problem with Crome last night.
While tuning my buddies ITR that I play with regularly, we hopped the freeway to do a lil part throttle perfecting.
With datalogging running and filling in values on the log just fine, the live auto adjustments, and the 'auto adjust maps' button would not make any changes to the actual fuel map. It would clear the recordings on the screen and act like it was, it even uploaded the changes to the ostrich automatically. But I was seeing no changes in AFR's at all, so I started watching the low cam fuel table while i hit the auto adjust button and nothing was happening.
If I highlighted a bunch of recordings in the log, toggled back to the fuel map and used ctrl+j and the auto adjust there, it would adjust.
The only thing I can think might have something to do with this, is that the bin file used was started in Crome 1.1.14, but I did install the new datalogger to the file before I started.
Any insight? Hopefully its just something I am doing that I can just tweak.
PS - They have a 3D map view now
While tuning my buddies ITR that I play with regularly, we hopped the freeway to do a lil part throttle perfecting.
With datalogging running and filling in values on the log just fine, the live auto adjustments, and the 'auto adjust maps' button would not make any changes to the actual fuel map. It would clear the recordings on the screen and act like it was, it even uploaded the changes to the ostrich automatically. But I was seeing no changes in AFR's at all, so I started watching the low cam fuel table while i hit the auto adjust button and nothing was happening.
If I highlighted a bunch of recordings in the log, toggled back to the fuel map and used ctrl+j and the auto adjust there, it would adjust.
The only thing I can think might have something to do with this, is that the bin file used was started in Crome 1.1.14, but I did install the new datalogger to the file before I started.
Any insight? Hopefully its just something I am doing that I can just tweak.
PS - They have a 3D map view now
05-29-2006, 09:26 PM
#5
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Re: Problem with Crome 1.2 Final (ps - they released 1.2 final, haha)
Originally Posted by xenocron
I would really think you might get a better response on the PGMFI forums...
Damn, this has me worried now, I have 3 tunes this week!
Damn, this has me worried now, I have 3 tunes this week!
05-30-2006, 12:58 AM
#7
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Re: Problem with Crome 1.2 Final (ps - they released 1.2 final, haha)
Originally Posted by xenocron
I see you posted...well, you will hear from me after tomorrow if 1.2 doesnt work for me tomorrow.
I hate having to go back to 1.14....
I hate having to go back to 1.14....
05-30-2006, 01:24 AM
#9
3.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 9,800
Re: Problem with Crome 1.2 Final (ps - they released 1.2 final, haha)
Originally Posted by Joseph Davis
Auto adjustments are gay, learn to tune like a man.
I spend on average 4 hours at a time in Mike's car, sometimes I like to just set it up and toss the .5% adjustment on his car and let it run while we cruise around. Its a pain in the *** having to jump screens all the time while rolling down the road. Fine leave the broken software broken, but add the ctrl+j function to work from the log screen
05-30-2006, 01:30 AM
#10
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: Problem with Crome 1.2 Final (ps - they released 1.2 final, haha)
I've used it three times, the only time extensively was on my daily driver where the stock P06 .bin was pretty close and I only wanted to skew AFRs a little bit.
BTW, learn to F9 and the Ctrl+J without looking at the keys. It's pretty easy after two or three cars.
BTW, learn to F9 and the Ctrl+J without looking at the keys. It's pretty easy after two or three cars.
