Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

Nice, you guys are awesome.

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

Just decided to pull this out and play with it, so good time for a bump.


If I had any pull in the hmt congress I'd vote for a sticky even. ;)

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

I added a section to the Misc Links for TurboEDIT related references.

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

what am I doing wrong? I've tried creating a basemap the difficult way 2 times and both times I ended up with a table of nothing but 0.00. I opened a stock map (pr4) and the stable map (ng28) and the excel ------sheet. I copy the fuel map from the pr4 map and paste it into the top table. then I begin copying the headings from the ng28 into the bottom table, as I copy each heading the values in that column turn to 0.00 where do I begin copying the headings from? the ng28 map is longer than the excel sheet.

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

you can only copy in the VAC tables...

the excel sheet should be setup for NG28 column headings already...you shouldnt have to change anything

the only reason i did that was incase column headings ever change again

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

I made these two base maps yesterday but I only tried the PM7 one on the car so far. There was a dead spot it felt like just when boost started to come in.. Anyone have an idea what would cause this? Here are the two maps..


PM6 base map
PM7 base map

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

There is only two things it could be...or a combination of both.

Tuning...or issues with the code.

Do you have a wideband to show what AFRs you are seeing at this "deadspot" ?

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

I got datalogging setup in the ECU.. But I have to get my friends laptop to check it cause mine doesn't have a serial port.. But is using uberdata for data logging acurate enough with the stock O2?

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

This is a TURBOEDIT thread...

Try the UD forums

Re:Offcial "How-to" - Setting up TurboEdit Basemaps
 

Alright, im going to be doing a basemap for my turbo set up. im going to be running around 6 PSI on a d15b2. When I import the maps from the base pm6 bin, and i set the stable bin for forced induction, does it automatically generate a baseline fuel and ignition map for boost? And is it off this baseline that i edit to get the AFR correct? Also, can anyone explain the ignition retardation to me? Thanks in advance. Im a noob to diy tuning.