Chris Harris

http://www.-------------/te/basemap.htm

Ok, no more asking others to setup basemaps for you...no more whining because you don't know what to do.

Follow this how-to step by step and use the tools that I gathered with it and you should be golden.

If you make a basemap...post it, for other lazyasses to use :P

Comments, questions, critiques welcome.

If you find an error in my write-up, please let me know so I can change it.

If your technique varies a little, post what you do so others can learn.

Jason, maybe this should go in the FAQ for posterity?

http://www.-------------/te/basemap.htm

TurboEF9

Nice write up! Thank a lot.. it helps out greatly.

Chris Harris

My pleasure pimp daddy!

EDIT: Jason, maybe you want to ----- this link around on some of the other boards TE is prolific on...I posted in PGMFI and G2IC.

-SphiNx-

:P

B16MIKE

i have a question...b. Difficult Way (but probably safer and more accurate IMO)

i. Open the stock ROM in TE

ii. Open the stable ROM in TE at the same time, you will now have two copies of TE running

iii. Now look at the column headings along the top of the maps, they are a little bit different. We need to account for this. Download my ‘Basemap Helper’ Excel Sheet below.

iv. Copy and paste in the stock MAPS in the designated areas of the Excel ------sheet. The tables should do the calculation work for you.

v. Type in the column headings that you see in TE into the Excel ------sheet on the bottom map. These will populate themselves.

vi. Copy that calculated map and paste it into TE.

vii. You can do this for both FUEL and IGNITION maps (2 separate steps

part vi,copy into the stabe or stock.it just says into t.e.?

Chris Harris

The stable....because the column headings are different.

I will update so there is no further confusion.

Sikocivic

Thank You,Thank You

Now it makes sense. I have been playing around with the program and now I am sure I should be able to do this. I can fab up manifolds and weld down pipes but I am NOT a computer guy, but after following your step by step instructions I think I can handle this.

Chris Harris

Any time you want to "fab" me up a downpipe or manifold...you just let me know.

----, fab one up for Blundar so he can get his car back on the road!

Sikocivic

If I ever get my Civic to run the way it should I have a long list of people that want stuff. When you have a welder you tend to have alot of "buddys".

durden

how do i open up the stock and stable roms at the same time? first i tried the easy way and once i import the stock into the stable the stable maps go away and i just see the stock ones

then the difficult way when i try to open up stable after already opening up stock the stock closes

thanks

edit* i just opened up turboedit again and got it to work :P