well i got everything but the exhaust hooked up and it idles at 3000. i used the aust. zc program since the jdm one wouldn't work. i also tried using a p06 basemap but it did the same thing. hopefully it's just something i messed up in uber. anyone have any ideas?
thanks,
nick

 

what kinda ecu USDM?
There are a lot of peoplem having problems with EDM ecu's

 

p06 usdm. the thing is that it ran great when it was just chipped NA so i'm pretty sure it's not the .bin.

 

burn a new bin.
Most likely you messed something up in uber

 

i've tried a couple already so i'm not sure what i'd be doing wrong?

 

hmmm weird...does it boost?? no CEL?
check for the idle rpm in the options see if it's set correctly, and check your timing at idle...maybe it's to high

 

well, i let it run until it normal op. temp. and the idle came down to around 1200 but still hunts a bit. i just drove it for the first time today around the neighborhood and was real easy. i didn't boost at all cause it's not tuned and i'm a -----. one thing that's definately gay is that ----, possible oil is squirting out of the adapterplate. it's hot right now but this is probably bad so i'll check it tommorow.